Reliability you
can count on.
Industrial PC Solutions > PICMG 1.3 > cPCI-6780VS/P1260
|
 View Larger Image |
| Bios | |
| Chip | Award 2Mb flash memory |
| Features | Intel PXE pre-boot on Ethernet Remote Console |
| Bus | |
| CompactPCI Bus | 32-bit/33MHz, TI PCI2050 PCI to PCI bridge |
| Standards | PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0 |
| CPU / Chipset / RAM | |
| Chipset | Intel 815E with ICH2 |
| CPU | Socket 370-based Intel Pentium III processor (FC-PGA2) up to 1.26GHz with 512K on-die L2 cache | Socket 370-based Intel Pentium III processor (FC-PGA) up to 1.0GHz with 256K on-die L2 cache | Socket 370-based Intel Celeron proces\sor (FC-PGA) up to 1.0GHz with 128K on-die L2 cache |
| FSB | 100/133MHz for Pentium III, 66/100MHz for Celeron |
| RAM | Three 168-pin DIMM sockets, up to 512MB un-buffered SDRAM |
| I/O Interfaces | |
| Backplane I/Os (Rear I/O) | J2: LCD | J3: KB | MS | COM3 | COM4 | LPT2 | FDD | IDE1 | Buzzer , (rear I/O) J4: SCSI | J5: VGA | LAN3 (MII)| USB x 2 | IDE2 | AC-97 (model dependant) |
| Display | Intel PXE pre-boot on Ethernet Remote Console |
| Ethernet | Triple 10/100Mbps Ethernet ports with RJ-45 connector: 2 ports on front panel by Intel 82559, 1 port on rear panel by Intel 82562 with 815E ICH2 built-in MAC |
| Floppy | Standard 34-pin connector on RTM |
| Front Panel I/Os | PS2 KB | PS2 MS | VGA | LAN1 | LAN2 | USB x 2 | LPT1 | COM1 |COM2 (RS-232) |
| IDE | ATA-100, dual channels, built-in 2.5" ATA HDD housing on front board |
| SCSI | LSI 53C895, Ultra-2-Wide SCSI with LVD (cPCI-6780 VS) |
| USB | USB 1.1, four ports (2 for front, 2 for rear) |
| Mechanical and Environmental | |
| Compliance | CE, FCC Class A |
| Dimensions | 233mm x 160mm (L x W), 2 slots (8HP) wide |
| Form Factor | 6U CompactPCI |
| Measure Power Consumption | 5.88A @ +5V | 3.76A @ +3.3V | 270mA @ +12V | 120mA @ -12V | Consumption installed with Pentium III 1GHz CPU and 512MB RAM, without HDD |
| Operating Temp. | 0 to 60°C (inside-chassis temp, CPU type dependant, external air-flow required) |
| Shock | 15G peak-to-peak, 11ms duration, non-operation |
| Storage Temp. | (-20 to 80°C) |
| Vibration | Non-operation: 1.88Grms, 5-500Hz, each axis Operation: 0.5Grms, 5-500Hz, each axis, with 2.5" HDD |
| Other Features | |
| Hardware Monitoring | Monitoring CPU temperature | FAN speed | system temperature | Vcore and DC voltages |
| Operating System Compatibility | Microsoft Windows 98/ NT4.0/ 2000 (Other OS please contact ADLINK for availability) |
| Watchdog Timer | 1-255 sec or 1-255 min software programmable, can generate system reset |
Introduction
The cPCI-6780 series products are compliant with PICMG 2.0 CompactPCI specification with 6U dual-slot form factor. Both front panel I/O and rear panel I/O are supported by cPCI-6780 series products. It is not necessary to use the rear board if the application just requires only front panel I/O wiring or special backplane wiring. The front board (the CPU module) and the rear board (the rear I/O transition module) are sold separately. The standard
models cPCI-6780TS, cPCI-6780VS and cPCI-6780V are front boards. And the standard models cPCI-R6780S and cPCI-R6780V are rear boards.
Features:
- Built-in housing for 2.5" low profile HDD
- cPCI-6780V&VS built-in AGP 2 x VGA display by Intel 815E chipset
- cPCI-6780VS built-in Ultra-2 Wide SCSI by LSI SYM53C895 controller
- Standard 6U form factor, 2-slot (8TE/HP) width
- Supports 7 bus-master PCI devices on CompactPCI bus
- Supports up to 4 USB ports, 4 serial ports, 2 parallel ports
- Supports up to Socket 370-based Intel Pentium III processor (1.26GHz) with 512K L2 cache
- Three 168-pin DIMM sockets support up to 512MB un-buffered SDRAM