View Larger Image
|Bi-directional parallel port||SPP/EPP/ECP standards|
|BIOS||AMI Flash WinBIOS|
|Board size||7.3"(L) x 4.8"(W) (185 mm x 122 mm)|
|Board weight||1.2 lbs (0.5 Kg)|
|Bus Interface||ISA (PC/AT) bus|
|CPU||Intel: 486SX/DX/DX2/DX4/Pentium Over Drive; AMD: AM486DX/DX2/DX4/5x86; IBM/SGS/Cyrix: Cx486DX/DX2/M7/5x86; TI: 486DX2/DX4|
|Data Bus||32 bit|
|Enhanced IDE HDD interface||Supports up to four enhanced IDE|
(ATA-2 bus) large hard disk drives or other enhanced IDE devices.
Supports mode 3 and mode 4 hard disks (minimum data transfer
rate of 11.1 MB/sec).
|Floppy disk drive interface||Supports up to two floppy disk rives,|
5.25" (360 KB and 1.2 MB) and/or 3.5" (720 KB, 1.44 and 2.88 MB).
|IRQ SELECTION FOR COM PORTS:||COMA: Supports COM 1/2/3/4 & address is selectable;|
COMB: Supports COM 1/2/3/4 & address is selectable;
|Keyboard connector||A 6-pin mini DIN keyboard connector is located on the mounting bracket for easy access. An on-board keyboard 5-pin header connector is also available.|
|L2 Cache memory||On-board 128 KB, up to 512 KB (DIP package)|
|Max. power requirements||+5V @ 2.5A|
|Operating temperature||32 to 140oF (0 to 60oC); must use a cooling fan when using a DX4-100 CPU or above|
|PC/104||104-pin connector for a 16-bit bus|
|Power supply voltage||Single +5 V (4.75 V to 5.25 V)|
|Processing ability||32 bit|
|PS/2 Mouse connector||Shared with keyboard connector.|
|RAM memory||1MB to 65MB, two 72-pin sockets|
|Serial ports||One serial RS-232 port and one serial RS-232/RS-422/RS-485 port, jumper selectable. Both with 16C550 UARTs with16-byte FIFO buffer.|
|Shadow RAM memory||Supports system and video BIOS up|
to 256 KB in 32 KB blocks
|System performance||325 MHz in 80486DX4-100 (Landmark V2.0)|
|Watchdog timer||The time interval is software selectable from 2 to 32 seconds (15 steps, 2 seconds per step). Can generate a system reset or IRQ15.|
The SBC-410 is an all-in-one CPU card that supports L2 cache sizes from 128 KB to 512 KB (32 KB x 8, 64 KB x 8, or 128 KB x 8). This CPU card uses the M1489/M1487 chipsets, which accept Intel, AMD, Cyrix, or other compatible 486-based CPUs. The SBC-410 is fully PC/AT compatible, so your software will run without modifications.
On-board features include two high-speed serial ports (RS-232 and RS-232/422/485) with 16C550 UARTs, one bi-directional parallel port, and a floppy drive controller. If program execution is halted by a program bug or EMI, the board's 15-stage watchdog timer can automatically reset the CPU or generate an interrupt. This ensures reliability in unmanned or stand-alone systems.
The SBC-410 is built with two high speed local bus Enhanced IDE controllers. This controller supports (through ATA PIO) mode 3 and mode 4 hard disks, which enable data transfer rates of over 11 MB/second. It connects up to four IDE devices, including large hard disks, CD-ROM drives, tape backup drives, etc. The built-in enhanced IDE controller provides a 4-layer 32-bit posted write-buffer and a 4-layer 32-bit read-prefetch-buffer to boost IDE performance.
The SBC-410 supports 5V EDO DRAM. It also provides two 72-pin SIMM (Single In-line Memory Module) sockets for on-board DRAM. This gives you the flexibility to configure your system memory from 1 ~ 64 MB using the most economical combination of SIMMs.
The SBC-410 also features power management to minimize power consumption. It uses CMOS components and complies with the "Green Function" standard. If you need any additional functions, you can add industry-standard PC/104 expansion modules. We provide numerous PC/104 modules to meet your system requirements.