|
CPU Socket
Socket 478
CPU
Intel Pentium 4 processor in mPGA 478 package
CPU Front Side Bus
400 MHz
Chipset
Intel MCH 845 and ICH2
ATI Mobility M6 3D graphics controller with 16MB high speed DDR SDRAM
display memory
L2 Cache
Built-in CPU
BIOS
AMI/Award
System Memory
Up to 2 GB 2.5V 200/266 MHz DDR SDRAM on two 184-pin DIMM sockets
ECC support
IDE Interface
Support for four EIDE devices with Ultra DMA/100
FDD Interface
Up to two floppy disk drives
On-Board I/O
One IrDA and three USB ports
8 high driving GPIO (4GPI, 4GPO)
Parallel Port
One parallel port
Serial Port
Two serial ports
Watchdog Timer
Programmable via software from 0.5 sec. to 254.5 min.
Can be enabled/disabled by jumper
Solid State Disk Interface
DOC socket for up to 288 MB
Display
ATI Mobility M6 graphics controller
16 MB DDR SDRAM display memory
TMDS/LVDS Interface support
Dual view support
TV-out
Audio
AC '97 2.0
Ethernet
10BASE-T/100BASE-TX Ethernet
IEEE 802.3u auto-negotiation support
One RJ-45 connector with two LED indicators for LAN access and link status
2nd LAN available thru daughter board (ROBO-N100P)
Keyboard/Mouse
One mini-DIN 6-pin connector for keyboard and mouse
One 5-pin header for external keyboard connection
Other Features
Adaptec AIC 7892 single channel Ultra 160 SCSI controller thru
VTC0473 (optional)
Dimension
338.5(L) x 122(W) mm
13.33"(L) x 4.8"(W)
6-layer PCB
Power Requirement
+5V@3.7A
+12V (CPU) @2.7A, +12V (system) @60mA
Operating Temperature
0°C~60°C (32°F~140°F)
Storage Temperature
-20°C~80°C (-68°F~176°F)
Relative Humidity
5% to 90%, non-condensing
Ordering Information
VTC0442-Socket 478 Pentium 4 processor based PICMG SBC with DDR SDRAM, AGP
4X VGA, fast Ethernet and audio
|
Related