Also available in PDF format
(169K) | Technical Specifications
SummitGbX™ enables
Extreme Networks' Summit LAN switches to break through standard
Gigabit Ethernet distance limitations. With SummitGbX, Gigabit
Ethernet links are guaranteed up to 80 kilometers and can go to 100
kilometers or more, depending on the quality of the long-distance
fiber-optic line. This allows the deployment of full-duplex Gigabit
Ethernet over long distances via private or leased single-mode
fiber-optic lines.
Without SummitGbX, Gigabit Ethernet distances are only guaranteed
up to 5 kilometers, which limits deployment in campus networks.
SummitGbX extends Gigabit Ethernet distances across metropolitan area
networks, making it an ideal solution for service providers.
One SummitGbX is deployed at each end of a long-distance
fiber-optic line. Each SummitGbX features a Gigabit Ethernet port to
connect a local Summit LAN switch and a long distance interface set,
which consists of one optical transmitter and one optical receiver
port to connect to a SummitGbX at the other end of a fiber optic line.
SummitGbX uses two signal paths - one from the Gigabit Ethernet
interface to the long distance fiber interface and one from the long
distance fiber interface to the Gigabit Ethernet interface. Each
signal direction consists of an optical receiver, a clock/data
recovery unit (CRU) and a transmitter. The CRU maximizes signal
quality, thereby minimizing errors and optimizing cable length
performance.
- Extends the distance of Gigabit Ethernet links on Summit LAN
switches up to 80 kilometers on single mode fiber and to 100
kilometers or more, depending on the quality of the fiber
- Full-duplex bandwidth operation with 2 Gbps throughput
- High performance BER = 10-12 for worst case link
- One full-duplex Gigabit Ethernet fiber optic interface and one
full-duplex long distance fiber interface
- Standard duplex SC optical connector interface to Summit/BlackDiamond
LAN switches
- Standard SC long distance optical connector
- Graphical User Interface (GUI) via an RS-232C port: loop
back diagnostic control, signal, loss of synchronization and
temperature detection
- Compact, mountable single rack-unit form factor
- Built-in dual redundant/load-sharing power supplies
SummitGbX Product
Specifications
General
One 1000BASE-SX port One single mode long-distance interface with
SC connectors - one standard optical transmitter interface and one
standard optical receiver interface
Protocols and Standards
IEEE 802.3z/D5 1000BASE-SX
Management and Security
VT100 compatible serial management interface
GUI application
Password protection
Physical and Environmental
Dimensions: (H) 1.75 in x (W) 19 in x (D) 15 in
(H)4.45 cm x (W)48.26 cm x (D) 38.1 cm
Weight: 7.5 lb (2.5 kg)
Operating Temperature: 0° C to 40° C
Power: 100-240 VAC, 50 watts
Includes hardware for mounting in a standard 19-inch rack
Regulatory Compliance
FCC part 15 Class A
cUL listed to CSA 22.2 #950-95
CE Mark
Ordering Information
| Product:
SummitGbX
|
|
Order Number:
10922
|
|
Description:
One 1000BASE-SX port, one long-distance fiber interface.
|
Related