VTC1091 - Embedded NS Geode CPU Module

•  5.25"-size embedded SBC with onboard Geode processor, 64MB RAM, and three 10/100 Ethernet.


 

CPU
On-board
National Semiconductor Geode GX1 Low Power 1.8V 32-bit x86, MMX technology compatible processor with integrated FPU and 16KB L1 cache
300MHz

Chipset

NS CS5530A companion I/O multi-function south bridge & winbond 83977F I/O chip

BIOS
Phoenix licensed flashable BIOS

System Memory
Onboard
64MB (32MB optional)
SDRAM

IDE Interface

One PCI Enhanced IDE interface
Supports two Ultra DMA-33 (ATA-4), multiword DMA, and Programmed I/O (PIO) modes 0-4 EIDE devices. Two 44-pin 2.00mm headers with power for Disk-on-Module or 2.5" HDD.

FDD Interface

One floppy interface supports up to two floppy devices. One 34-pin 2.54mm header.
 

Serial Interface
One 16550A compatible serial port
RS-232
DB-9 connector

Parallel Interface

One parallel port
IEEE 1284 compliant ECP
 

USB

Header for USB

Real Time Clock
Integrated RTC with Lithium battery backup.
 

Solid State Disk / Flash Memory
port Disk-on-Module via IDE port #1.
 

Ethernet

Three Realtek RTL8139 Fast Ethernet controllers
10/100Base-T
RJ-45 connectors
LEDs for link status and activity
 

Operating Temperature

0° to 60° Celsius

Storage temperature

-20° to 70° Celsius

Humidity

10% to 90% relative humidity, non-condensing

Ordering Information
VTC1091- 5.25"-size embedded SBC with onboard Geode processor, 64MB RAM, and three 10/100 Ethernet.