|
CPU Socket
Socket 478
CPU
Intel® Pentium® 4 processor with 256K cache on die
Socket 478 CPU running 400MHz system bus, CPU speed up to 2GHz or above
Chipset
Intel® 845 Chipset
Intel® 82801 x1 I/O Controller Hub (ICH2)
Intel® 82802 x1 Firmware Hub (FWH)
PCI V2.2 compliant
BIOS
Award System BIOS
Plug & Play support
Advanced Power Management support
Advanced configuration & Power Interface support
4M bits flash ROM
System Memory
168-pin DIMM x3 Support Max. memory size to 3GB
ECC support (single bit error correction/Multiple bit errors reporting)
No Registered DIMM Support
On Board VGA
ATI Rage 128 Pro (Ultra 4XL) VGA Controller, 1.5V AGP 4X interface
16MB VGA Memory
on board
Fully PC98 and
PC99 Compliant
15 pin CRT
controller x1, 20 pin DVI connector x1
On Board LAN
ICH2 embedded MAC with Intel® 82562EM(PLC) PHY 10/100 Ethernet
controller
single Chip
10/100 Base T/TX x 1 support, full duplex
Compliant with
PCI V2.2, IEEE 802.3X
Drivers support:
DOS/Windows®, Windows® 95/98/2000, Windows® NT, Netware 5.0, SCO Open Server
5.0, Linux
RJ45 with LED
connector x1
Support Remote
Monitoring (Alerting on LAN)
On Board I/O
(ICH2)
ITE 8712F-A Server I/O
SIO x2, with 2 x
16C550 UARTs, 10 pin header x1, D-Sub 9 pin x1
PIO x1,
bi-directional, EPP/ECP support, 26 pin connector x1 Floppy Disk controller:
34 pin connector x1
6 pin mini DIN
connector x1, for PS/2 keyboard/mouse, 5 pin connector x1 (for external
keyboard)
On board buzzer
x1
GPIO (4 in 4
out)
On board 2 pin
header for I2C
On Board 2 pin
header for reset SW / 2 pin for IDE active LED / 2 pin ATX power SW
One 3 pins power
header for 3 pins Power Cable connect to Backplane Board to support ATX
Power On function
On board 4 pin
Additional Power Source Input
System Monitor
Derived from Super IO ITE 8712F-A to system monitor
8 voltages (For +1.8v, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V
Stand-By)
One Fan speed (For CPU), Two for System Fan
3 temperatures (one for CPU, the others for system)
ACPI Function
Soft Power off
Power On LAN
Power On Keyboard
Power On Ring
Real Time
Clock
On chip RTC with battery back up
External Li
Battery x1
Watchdog Timer
Watchdog timeout can be programmable by Software from 1~64 seconds
On Board Bus Expansion
On Board proprietary 32bit PCI interface for Upgrade Module
PCI to ISA Bridge & ISAMAX Support
ITE 8888F x1 PCI to ISA Bridge
Provide 64mA high driving capability to maximize ISA signals for support ISA
cards up to 20 on the backplane ISA Slot
Dimensions
338.58mm(L) x 122mm(W)
Power Requirements
+5V: 10A (Max.) +12V: 10A (Max.) -12V: 50mA (Max.)
Environments
Operating temperatures
0°C to 60°C
Storage temperatures
-20°C to 80°C
Relative humidity
10% to 90% (Non-condensing)
Certification
CE approval
FCC Class A
Ordering Information
VTC0479 - Full-size Socket 478 Pentium® 4 (32bit/33MHz) CPU Card w/VGA/LAN
(VTC479)
|
Related