VTC0152  AC-DC Power Supplies

(N+1,300W + 300W,ATX12V)
Input:
*Input Range: 100-240VAC(Universal power input),47-63Hz
*Input Current: 6 Amps @115VAC/ 3 Amps @230VAC
*Active power factor correction, PF>0.95

 

Output
Voltage V1
+5V V2
3.3V V3
+12V V4
-5V V5
-12V +5V
Standby
Max. Load 30A 28A 15A 0.3A 0.8A 2A
min.
Load 2A 0A 0.5A 0A 0A 0A
The +3.3V & +5V combined output is 180 watts maximun.and +3.3V +5V & +12V combined output is 280 watts maximun.

load reg.% ±5% ±3% ±5% ±10% ±5% ±5%
Cross
reg.% ±5% ±3% ±5% ±10% ±5% ±5%
Line Reg.% ±1% ±1% ±1% ±1% ±1% ±1%
Ripple & Noise
50mV p-p 33mV p-p 120mV p-p 50mV p-p 120mV p-p 50mV p-p




Efficiency: 65% Min. at full load
Hold up time: 20ms at full load
Power good signal: 100~500ms
Shout Circuit Protection: A short circuit on any DC output will cause the power to latch.
Over Current protection: To set at 110-130% of +5V,+3.3V & +12V output.

Over voltage protection: To set at 110-130% of +5V,+3.3V & +12V output.


Teamperture range:
32°F ~122 °F ( 0~ 50°C)
M.T.B.F. > 100,000 hours at 75% load and 25° C

Relative Humidity: Operating: 20~90% non-condensing

Safety Standard: UL 1950, FCC Class B
CSA 222
TUV IEC 950 , CB Report
CE report
Dimention: (W x H x D )
124 x 40.6 x 196.6 mm/ 4 7/8"x 1 9/16"x 7 3/4"