P2U-6300F

- Power Supply -
300W ATX Power Supply (for 2U chassis)
P2U-6300F

*FEATURES*
0¢XC to 50¢XC Operating Temperature Safety meets UL1950, CSA22.2 NO/950, TVU IEC950 Efficiency minimum 65% Remote ON/OFF control
*INPUT CHARACTERISTICS*
Input Voltage	90V ~ 132 V/AC / 180V ~ 270V/AC auto-switching
Input Frequency	47Hz to 63Hz
Input Current	7.0A max. for 115VAC, 3.5A max. for 230VAC
Inrush Current	40.0A max. for 115VAC 80.0A max. for 230VAC


*OUTPUT CHARACTERISTICS*
Model	Output Voltage	Load Current		Ripple & Noise	Load reg.	Line reg.
		Min	Max
ATX-730	3.3V	3.15A	3.45A	100mV	¡Ó5%	¡Ó1%
	+5V	4.75A	5.25A	100mV	¡Ó5%	¡Ó1%
	+12V	11.4A	12.6A	200mV	¡Ó/%	¡Ó1%
	-5V	-4.6A	-5.5A	200mV	¡Ó10%	¡Ó1%
	-12V	-10.8A	-13.2A	200mV	¡Ó10%	¡Ó1%
	-5VSB	4.75A	5.25A	100mV	¡Ó5%	¡Ó1%
Remarks: Total current of +5V and +3.3V not exceed 65A, total +5V and 3.3V and 12V power not exceed 285W

*SPECIFICATION*
Dielectric Withstand	Input/Output 1500VAC for sec. Input to frame ground 1500VAC for 1sec.
Efficiency	65% typical at full load.
Hold up time	16ms minimum at full load & normal input voltage
Power good signal	ON DELAY 100ms to 500ms, OFF DELAY 1ms
Output Protection	- Over load protection: 130¡Ó20% - Over voltage protection: +5V -> 5.5V ~ 7.5V, +3.3V -> 4.0 ~ 5.5V - Over circuit protection: 5V, 12V, 3.3V 130% ¡Ó20% at full load -5V, -12V short circuit
Operation Temperature	0¢XC to 50¢XC
Storage Temperature	-20¢XC to 80¢XC
Altitude	It can operate at altitude max. 10,000 ft.
Humidity	5% to 95% Non-Condensing
Designed Comply with	UL1950, CSA C22.2 NO.950, TUV IEC950, FCC "A", CISPR22 "A"

Notes:

Trademarks: All names of products appearing in this page are the registered trademark of their respective owners, organizations and companies.
Detailed Specification & Mechanical Drawing in *pdf format: Click
To view *.pdf files, click on

VoxTechnologies Corp. - Industrial Computer Leader
Tel: 1-972-234-4343 Fax: 1-972-234-4295 Toll-Free: 1-888-568-6224