Reliability you
can count on.
Industrial PC Solutions > Power Supplies > EFAP-401
|
 View Larger Image |
Ordering Information:
| EFAP-401F | 400 watts Output Power Dual +12V Output Rails EPS1U Application Meet 1U Rack Mount System |
| General | |
| General Specifications (PS) | Input Range: 100 to 240 VAC, +/-10% Power Factor: 0.95 minimum Efficiency: 70% minimum, at full load Hold up Time: 20mS minimum, at full load PSON (Remote ON/OFF): TTL compatible signal Power Good: 100 to 500 ms, TTL compatible signal Cooling Fan: 40x40x28 mm (SANYO) Operating Temperature: 0 to 50 degree Operating Humidity: 20 to 90 % |
| Agency Requirements & Regulations | |
| Agency Requirements | Harmonic: Meet EN61000-3-2 standards EMI/RFI: CE, FCC class B and CISPR class B Safety: UL, cUL, CB, TUV |
| Environment | |
| Operating Temperature | |
| Form Factor | |
| Depth or Length | 250 mm |
| Height | 40 mm |
| Width | 100 mm |
| Input (PS) | |
| Input (PS) | Input Voltage: 100-240VAC Input Frequency: 47-63Hz Input Current: 7A MAX |
| Input Voltage | |
| Input Voltage Range Type | AC-DC (Auto Ranging) |
| Input Voltage Type | AC/DC |
| Notes | |
| Notes (PS) | 1. The +12V1 & +12V2 combine output currents maximum are 25A for EFAP-351 and 32A for EFAP-481. 2. The +5 & +3.3 Volt combine total output shall not exceed 200W. 3. The +5, +3.3 and +12 Volt combine total output shall not exceed 330W for EFRP-351 and 460W for EFAP-481 4. Noise bandwidth is from DC to 20 MHz. |
| Output Total Power | |
| Total Output Power Operating Max | 400 W |
| Output Voltage | |
| +12V1 VDC | Max Load Current: 18A Min Load Current: 1A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 120mV |
| +12V2 VDC | Max Load Current: 18A Min Load Current: 0.5A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 120mV |
| +3.3 VDC | Max Load Current: 30A Min Load Current: 0A Load Regulation: ±3% Cross Regulation: ±3% Line Regulation: ±1% Ripple & Noise: 50mV |
| +5 VDC | Max Load Current: 30A Min Load Current: 0.5A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 50mV |
| +5 Vsb DC | Max Load Current: 2A Min Load Current: 0A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 50mV |
| -12 VDC | Max Load Current: 0.8A Min Load Current: 0A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 120mV |
| -5 VDC | Max Load Current: 0.3A Min Load Current: 0A Load Regulation: ±5% Cross Regulation: ±5% Line Regulation: ±1% Ripple & Noise: 100mV |
Features:
- Active power Factor Correction
- Dual +12V Output Rails
- Dual Processors Application
- MTBF >100,000 Hours
- Over Current Protection
- Over Power Protection
- Over Voltage Protection
- Remote DC Sense on +5V and +3.3V
- Short Circuit Protection
- Universal Power Input