Reliability you
can count on.
Industrial PC Solutions > Full Size SBC > WSB-9150
|
 View Larger Image |
Ordering Information:
| WSB-9150-R10 | IEI WSB-9150-R10 CPU Board - PICMG 1.0 Socket 478 800MHz FSB CPU Card |
| WSB-9150DVI-R10 | PICMG 1.0 Sokcet 478 800MHz FSB CPU Card with VGA,PCI-Express GbE,SATA, USB2.0 and DVI |
| WSB-9150-R20 | Nexcom WSB9150-R20 - WSB9150 Series, Full Size,PICMG 1.0, Socket 478 FSB, CPU Card with VGA, PCIe GbE, S-ATA and USB 2.0 |
| WSB-9150DVI | PICMG 1.0 Sokcet 478 800MHz FSB CPU Card with VGA,PCI-Express GbE,SATA, USB2.0 and DVI |
| WSB-9150DVI-R20 | S478 800MHz SBC W/ VGA,GbE,SATA,USB2.0,Audio and DVI |
| WSB-9150-RI0 | PICMG 1.0 Socket 478 800MHz FSB CPU Card |
| WSB-9150-R21 | Full-size PICMG 1.0 CPU card supports Socket 478 Intel® Pentium® 4 and Celeron® D processors with an 800 MHz or a 533 MHz FSB and Hyper-Threading Technology and comes with VGA, PCeI GbE LAN, SATA and USB 2.0 |
| WSB-9150DVI-R21 | IEI WSB-9150DVI-R21 Single Board Computer / Full Size- PICMG 1.0 and RoHS compliant, Socket 478 Intel Pentium 4/ Celeron D support 800/533 MHz FSB up to 3.4GHz with Hyper-Threading Technology |
| Display | |
| Display Interface | VGA integrated in Intel® 915GV DVI by Silicon Image SIL1362CLU (WSB-9150DVI Only) |
| I/O | |
| Audio | 5.1 Channel AC’97 Audio Kit with Realtek ALC655 codec
7.1 Channel HD Audio Kit with Realtek ALC883 |
| Digital I/O | N/A |
| Ethernet | Broadcom BM5787M PCIe GbE chipset |
| I/O | 4 x SATA x 1 Interface
1 x IDE x 2 Interface 8 x USB 2.0 x 1 Port 2 x RS-232 x 1 Port 1 x IrDA 1 x PS/2 for KB/MS 1 x FDD x 1 Interface 1 x LPT |
| System | |
| BIOS | AMI Flash BIOS
SMIBIOS (DMI) compliant Console redirection function support PXE (Pre-Boot Execution Environment ) support USB booting support |
| Chipset | Intel® 915GV + ICH6 |
| CPU | Socket 478 Intel® Pentium® 4/ Celeron® D support 800/533 MHz FSB up
to 3.4GHz with Hyper-Threading Technology. |
| Dimensions | 338mm X 122mm |
| Gross Weight | GW:1.1kg |
| Operating Humidity | operation: 5% ~ 95% non-condensing |
| Operating Temperature | operation: 0 ~ 60° C (32 ~ 140° F) |
| Power Consumption | 5V @ 5.67A, 12V @5.89 A (P4-3.2G/512K/800(HT), 2GB DDR 400MHz) |
| Power Supply | AT/ATX support |
| System Memory | 2 x 184-pin dual channel DDR 400/333MHz up to 2GB |
| Watchdog Timer | Software programmable 1~255 sec. system reset |
Introduction
The WSB-9150 board is a PICMG form factor board, which comes fully equipped with high performance Processor and advanced high performance multi-mode I/O, designed for the system manufacturers, integrators, or VARs that want to provide all the performance, reliability, and quality at a reasonable price.
In addition, the GMCH provides an integrated graphics device (IGD) delivering cost competitive 3D, 2D and video capabilities. The GMCH’s analog port uses an integrated 400 MHz RAMDAC that can directly drive a standard progressive scan analog monitor up to a resolution of 2048x1536 pixels with 32-bit color at 85 Hz.
WSB-9150 supports one or two 64-bit wide DDR400 data channels. Available bandwidth is up to 3.2GB/s in single-channel mode and 6.4GB/s in dual-channel mode.
The single-chip PCI Express based 88E8053 device with a Gigabit Ethernet controller. It supports full 100/1000-base-T Ethernet. It is fully integrated 10BASE-T/100BASE-TX LAN solution with high performance networking functions and low power features.
The ICH6 integrates SATA Host Controller, supporting four SATA ports with up to 150MB/s maximum transfer rate. The ICH6R also offers data striping for higher performance (RAID Level 0), and mirroring for Data security (RAID Level 1).
For applications that need high-speed serial transmission, WSB-9150 provides eight USB2.0 ports for your convenience. The high speed USB2.0 host controller implements an ECHI interface that provides bandwidth up to 480Mb/s.
Features:
- 1 x GbE chipset, 4 x SATA, 8 x USB2.0, 2 x RS-232
- 2 x 184-pin dual channel DDR 400/333MHz up to 2GB
- PICMG 1.0 and RoHS compliant
- Socket 478 Intel® Pentium® 4/ Celeron® D support 800/533 MHz FSB
