Industrial PC Solutions > Full Size SBC > ROBO-8820VG2


Model Number

ROBO-8820VG2

Part Number

VTC2616

Description

PORTWELL ROBO-8820VG2 Dual Intel Xeon processor based PICMG 1.2 (ePCI-X) Single Board Computer with VGA, LAN, USB x 4, and dual Gigabit Ethernet

Model Family

ROBO-8820



View Larger Image

General
Bus ArchitecturePICMG 1.2 (ePCI-X)
Dimension338.5mm(L)x122mm(w)13.33"(L)x4.8"(W)
PCB12-layer
SBC SizeFull-Length
Display
DisplayATI Rage XL PCI VGA graphics controller; High2D and 3D performance; D-sub 15-pin VGA connector on bracket
Display Memory8MB display memory
Display ResolutionDisplay resolution up to 1600x1200 @ 85Hz
Form Factor
Width122 mm
I/O
AudioN/A
EthernetIntel 82546EB PCI-X dual port Gigabit Ethernet controller; Two RJ-5 connector with two LED indicators for LAN access and link status
Keyboard & MouseOne 6-pin header for keyboard and mouse through PA-I1KUC
MIOOn-board Winbond W83627HF super I/O; Up to Two Floppy Disk Drives
Parallel PortOne
Serial PortTwo serial
USBFour USB 1.1
System
BIOSAward BIOS
ChipsetIntel E7501 and ICH3-S
CPUIntel Xeon LV Xeonn processor (single or Dual processor) in 604-pin & 603-pin PPGA package, 533/400 MHz FSB
Expansion InterfaceTwo independent PCI-X buses; Proprietary Hub Link expansion connector for up to 4 PCI-X buses expansion
H/W Status MonitoringSystem monitor (fan, temperature, voltage)
MTBF142,578 hrs
Operating Humidity5% to 90%, non-condensing
Operating Temperature0 to 60C
Power SupplyTypical: +5V@3.1A; +12V(CPU)@6.5A; +12V(System)@ 1.2A; +3.3V@2.9A
SSDTwo independent PCI-X buses; Proprietary Hub Link expansion connector for up to 4 PCI-X buses expansion
Storage Temperature-40 to 75C
System MemoryUp to 4GB DDR 266/200 SDRAM on two 184-pin DIMM sockets; Support ECC, registered
Watchdog TimerProgrammable via software from .5 sec. to 254.5 min.

Introduction
PORTWELL ROBO-8820VG2 is a reliable design for high processing performance dual Intel Xeon processor that has an Intel E7501 chipset for optimizing system bus, memory and I/O bandwidth to deliver enhanced performance and scalability.

It has high speed mainstream DDR SDRAM memory, ECC function for data sensitive application and an ATI Rage XL graphics chip with 8MB memory that provides the best 2D and 3D performance in entry-level class.

The PORTWELL ROBO-8820VG2 has Intel 82546EB, dual Gigabit Ethernet port controller for the best network throughout, dual PICMG 1.2 compliant PCI-X bus for higher expandability.

Features:

  • ATi Rage XL display chip
  • Dual Intel Xeon processor
  • FDD pin-header
  • Two 184-pin DIMM sockets
  • Two GbE LAN port
  • Two IDE connectors
  • Two USB pin-header