Reliability you
can count on.
Industrial PC Solutions > Full Size SBC > MB800
|
 View Larger Image |
Ordering Information:
| MB800FH | Ibase MB800-FH, Socket 478 Intel 845GE ATX Motherboard with VGA, integrated 10/100 LAN and Gigabit LAN |
| MB800H | Ibase MB800-H, Socket 478 Intel 845GE ATX Motherboard with VGA and integrated 10/100 LAN |
| MB800V-R | Motherboard |
| CPU | |
| CPU Class | Intel Pentium IV / Celeron D |
| System | |
| Audio | ICH4 integrated audio with AC97 Codec |
| BIOS | Award BIOS, ACPI supported |
| Chipset | Intel® 845GV chipset |
| CPU | Intel® Pentium® 4, 1.30GHz~3.06GHz |
| CPU Socket | Socket 478 |
| Dimensions | 305mm x 244mm (12" x 9.6") |
| DIO | 4 in / 4 out |
| Expansions | 3 PCI, 3 ISA Slots, 1 MicroPCI 1 AGP slot (for MB800 only, not MB800V)* |
| FDD | Supports up to two floppy disk drives: 3.5" and/or 5.25" drives; 3 Mode support |
| Form Factor | ATX motherboard |
| H/W Status Monitoring | Built in Winbond W83627HF; monitors system/CPU temperature and voltage status |
| IDE Interface | Built in ICH4; Two enhanced IDE supports 4 IDE devices including UDMA33/66/100, PIO mode 4 and bus master |
| IR Interface | Pin header |
| Keyboard/Mouse | PS/2 type keyboard and mouse connectors |
| L2 Cache | 256K/512K, CPU integrated |
| LAN | ICH4 integrated Ethernet, 10Base-T / 100Base-TX |
| LPC I/O | Winbond 83627HF supports IrDA x 1, Parallel x 1, COM1 (RS232), COM2 (RS232/422/485), FDC up to 2.88MB (3 Mode support), hardware monitoring |
| Operating Temperature | 0°C~60°C (32°F~140°F) |
| Parallel | One parallel port supports SPP/EPP/ECP |
| PCI to ISA Bridge | Winbond 83628, Winbond 83629 |
| Power Connector | ATX 12V power connector |
| Power Consumption | Intel® Pentium® 4 processor 1.8GHz with 512MB DDR memory +5V: 5.7A; +12V:8.5A Intel® Pentium® 4 processor 2.2GHz with 512MB DDR memory +5V: 6.35A; +12V:6.2A |
| Processor Side Bus Frequency | 533MHz (133MHz x4) / 400MHz (100MHz x4) |
| RTC | 10%~90% (non-condensing) |
| Serial | One RS-232/422/485 and three RS-232 ports COM3 and COM4 supported by Winbond 83877 |
| SSD | Supports 2MB~288MB M-Systems DiskOnChip flash disk |
| Storage Temperature | -20°C~80°C (-68°F~176°F) |
| System Memory | Two DDR slots Support up to 2GB PC200/266 DDR SDRAM |
| USB | USB 1.1 and 2.0 compliant Supports 4 USB ports |
| VGA | Intel® 845G / 845GV chipset integrated AGP 4X, Optionally supports LVDS, CRT & TV-out interface |
| Watchdog Timer | Generates system reset; 256 levels |
Introduction
The world's first Pentium 4 industrial motherboard, MB800, is based on the Intel 845G chipset. It packs the key features of the 845G chipset, including 533MHz processor side bus and integrated LAN and graphics. The 845G chipset includes Intel's new ICH4 I/O control hub that supports USB 2.0 with peak transfer rate of up to 480Mbps.
The AGP4X integrated graphics supports interface such as TV out, LVDS and CRT. It can have up to DVMT 64MB shared memory. One-channel and dual-channel digital display are supported with resolutions of up to 1600x1200 and 2048x1536 @ 60Hz respectively. The MB800 motherboard supports Pentium 4 processors of up to 2.6GHz+ and comes optionally with a secondary LAN that supports either up to 1000Mb/s (Gigabit LAN) or 100Mb/s data transfer rate. Two DDR slots on board support up to 2GB of DDR200/266 non-ECC DDR SDRAM modules. Hardware monitoring is available with the Winbond W83627HF chipset on board.
Other special features of the board includes 256-level watchdog timer, DiskOnChip socket, digital I/O (4 in / 4 out) and PCI to ISA bridge. Measuring 305mm by 244mm, MB800 also has an AGP slot, three PCI slots, three ISA slots and a MicroPCI socket. With ISA slots on board and a long life cycle, MB800 is the powerful platform of choice for industrial applications.