Industrial PC Solutions

Industrial PC Solutions > Full Size SBC > AMC10G-CX4


Part Number

AMC10G-CX4

Vox Part Number

VTC9870643

Make

DIVERSIFIED TECHNOLOGY

Description

AdvancedTCA Switch Blade (10 Gigabit Ethernet) 1G/10G Ethernet AdvancedTCA Hub Board AMC.2 Type 5 and AMC.2 Type E1 with 10GBase-CX4 and 10/100/1000Base-T


View Larger Image

Ordering Information:

AMC10G-XFP   AdvancedTCA Switch Blade (10 Gigabit Ethernet) 1G/10G Ethernet AdvancedTCA Hub Board AMC.2 Type 5 and AMC.2 Type E1 with XFP and SFP

Introduction
With DTI’s third generation of Ethernet-based ATCA switch, ATS1936, the focus is on offering flexibility through 10G capabilities and multiple AMC sites. The market has come to rely on DTI as the Leader in ATCA switching, requiring a continuous drive to provide the performance increases required in today’s bandwidth-intensive applications; such as IMS, VoIP, Security, IPTV, and multi-service IP Networks.

Features:

  • 3 mid-size AMC sites: AMC.0 R2.0 compliant,AMC.2 Type 5 (10GbE),AMC.2 Type E1 (1GbE), Telecom clocking (master or linecard), Directly connected AMCs for PCI-E and SAS/SATA
  • ATCA PICMG 3.0/3.1 hub board
  • Base PICMG 3.0 Ethernet interface: 24 1GbE and 3 10GbE ports,Wire-speed performance, Layer 2 switching, Layer 3 routing,Full IPv6 support,L2 and L3 Multicast support,10GbE & 1GbE uplinks
  • Dual image firmware for disaster recovery
  • Dual redundant shelf management controller support (Cross Connect)
  • Fabric 3.1 PICMG 3.1 Option 1 and Option 9 Ethernet interface: 20 1GbE/10GbE ports, Wire-speed performance,Layer 2 switching, Layer 3 routing, Full IPv6 support, L2 and L3 Multicast support, 10GbE up
  • Full 16 slot shelf supported
  • Fully managed solution with SNMP, serial, web interface, telnet, and SSH
  • PICMG 3.0 R2.0 ECN002 compliant
  • Separate control processors for Base and Fabric
  • Various uplink options via front panel and RTM