Reliability you
can count on.
Industrial PC Solutions > Full Size SBC > ACTI-688
|
 View Larger Image |
| General | |
| ATX Power Control Interface | One 4-pin header to support ATX power control with Modem Ring-On and Wake-On-LAN function |
| Auxiliary I/O Interfaces | System reset switch, external speaker, Keyboard lock and HDD active LED |
| BIOS | AMI system BIOS with 128KB Flash ROM to support DMI, PnP, Green function, |
| Bus Interface | Follow PICMG standard (32-bit PCI and 16-bit ISA ), fully complies with PCI bus specification V2.1 |
| Chipset | Intel 440BX AGPset |
| CPU | Intel Pentium II processors and Pentium III processors up to 550 MHz, CPU bus clock : 66/100 MHz, CPU core/bus clock ratio : x2 to x8 |
| Dimensions | (L X W) : 339.5mm (13.36”) X 121.5mm (4.78”) |
| Disk-On-Chip | Reserved one 32-pin socket for M-system Flash Disk up to 144MB |
| External Power Connection | Supports two standard 5-1/4” disk power connectors to enhance power driving |
| Floppy Drive Interface | Supports one FDD port up to two floppy drives and 5-1/4"(360K, 1.2MB), 3-1/2" (720K, 1.2MB, 1.44MB, 2.88MB) diskette format and 3-mode FDD (option) |
| Humidity | : 5% ? 95%, non-condensing |
| IR Interface | Supports one 6-pin header for serial Fast/Standard Infrared wireless |
| L2 Cache Memory | 256KB/512KB PBSRAM built in Pentium-II or Pentium-III processor module |
| Main Memory | Four 168-pin DIMM sockets, supporting 3.3V SDRAM with parity/ECC function up |
| Mouse and K/B Interface | Supports two 6-pin Mini-DIN connectors and one 5-pin shrouded connector for PS/2 mouse, keyboard and backplane connection |
| Operating Temperature | : 0? ? 60? (32? ? 140?) |
| Parallel Port | Supports one SPP, EPP/ECP bi-directional parallel port |
| PCB Layout | 8 layer |
| PCI IDE Interface | Supports two enhanced IDE ports up to four HDD devices with PIO mode 4 and |
| Power Good | On-board power good generator with 300ms ? 500ms reset duration |
| Power Requirements | +5V @10A (typ.), +12V @180mA, -12V @30mA |
| Real Time Clock/ Calender | Supports Y2K Real Time Clock/calendar with battery backup for 10-year data retention |
| Serial Ports | Support two high-speed 16C550 compatible UARTs with 16-byte T/R FIFOs |
| Storage Temperature | -20? ? 80? |
| System Monitoring | Monitor system temperature, operating voltage, and fan status |
| USB Interface | Supports two USB (Universal Serial Bus) ports for high speed I/O peripheral devices |
| Watchdog Timer | 0.5,1,2,4,8,16,32,64 sec. time-out intervals by jumper setting or 255 intervals from |
| Weight | 1.1 lb. (0.5kg) |
Introduction
The ACTI-688 all-in-one single board computer is designed to fit a high performance dual Pentium II or Pentium III based CPU and compatible for high-end computer system with PCI Local Bus architecture.
It is made to meet today’s demanding pace, and keep complete compatibility with ardware and software designed for the IBM PC/AT. It's beneficial to build up a high performance and high data availability system for VARs, or system integrators.
The on-board dual processors operation will bring high performance to all segments of the PC, workstation, and server market. This single board computer can run with dual Intel Pentium II or Pentium III processor up to 550 MHz, and support DIMM up to 1GB DRAM.
The enhanced on-board PCI IDE interface can support 4 drives up to PIO mode 4 timing and Ultra DMA/33 synchronous mode feature. The on-board Super I/O Chipset integrates floppy controller, two serial ports, one FIR (Fast Infrared) port and one parallel port.
Two high performance 16C550-compatible UARTs provide 16-byte
send/receive FIFOs, and the multi-mode parallel port supports SPP/EPP/ECP function. Besides, two USB (Universal Serial Bus) ports provide high-speed data communication between peripherals and PC.
The PICMG standard makes the ACTI-688 works with the legacy ISA, ISA/PCI or multi-slots PCI-bus backplane. The on-board 32-pin DIP socket supports M-system Disk-On-Chip product up to 144MB.
The Watch-Dog Timer function can monitor your system status. Two 6-pin Mini-DIN connectors are provided to connect PS/2 Mouse and Keyboard.
The on board Flash ROM is used to make the BIOS update easier. Two standard 5-1/4” disk power connectors (4-pin) are reserved to directly get more power energy for big power applications, and the additional 5-pin shrouded connector is reserved for connecting Keyboard interface on the backplane.
The high precision Real Time Clock/calendar is built in to support Y2K for accurate scheduling and storing configuration information. One 4-pin header is designed to support ATX power function. All of these features make ACTI-688 excellent in applications.
Features:
- ECC function
- Four EIDE devices
- H/W monitoring
- Intel® 440BX AGPset,
- ISA-bus
- One DOC socket
- One IrDA
- One Parallel Port
- PC100 MHz SDRAM
- Slot-1 processors
- SSD
- Two FDD
- Two Serial Ports
- Two USB ports
- Wake-on-LAN
- WDT