|
![]() View Larger Image |
| System | |
| Bus Interface | ISA and PCI |
| Cache Memory | 2MB, 512kB or 0kB Level 2 |
| Chipset | Intel 855GME/ICH4M |
| Driver | Up to 1GB PC2700 DDR333 SODIMM |
| FSB | 400MHz |
| LPC I/O | EIDE –Dual PCI-bus Enhanced Ultra DMA 33/66/100 Synchronous IDE Interface supports up to two hard drives Serial – 2 ports, TTL, transceivers on baseboard Parallel – EPP/ECP bidirectional port Floppy – Supports 1 or 2 drives, shared with parallel USB – 4 USB 2.0 ports (four root hubs) Keyboard/Mouse – PS/2 interface Audio – AC97 speaker, mic, headphone |
| Mini PCI | Size – 95x114mm (3.7x4.5"); ETX form factor Power Requirements (with 128MB RAM, 100% Loaded) – 1.4GHz 3.3A @ 5V – 1.0GHz 2.8A @ 5V – 800MHz 2.7A @ 5V Environmental – Temperature (100 CFM system air low)* Standard: -20° to +70°C Optional: –40° to +85°C Storage: –55° to +85°C Board Thickness – .093" (2.36mm) |
| On-board EIDE | Ethernet – Intel 82551QM (10/100 BaseT) Ethernet with wake-on-LAN |
| Power Supply | Triggers when input voltage drops below predetermined threshold |
| Processor | Choice of – 1.4GHz LV Pentium M 738 – 1.0GHz ULV Celeron M 373 – 800MHz ULV Celeron M |
| Speed | OS Support – Ampro Embedded Linux, VxWorks v5.5.1, QNX v6.3, Windows CE 5.0, XP, XPe BIOS – AMI with ACPI 2.0 including S3 |
| System Monitor | PC-compatible DMA and interrupt controllers and timers |
| Video Interface | Controller – Integrated Intel Extreme Graphics 2 – AGP 128-bit 3D engine – Supports resolutions to 2048x1536 – Up to 64MB UMA Frame Bufer – Dual channel LVDS lat panel support |
| Watchdog Timer | yes |
Introduction
Ampro ETX® 802 is a small, ultra high-performance, low-power Centrino® processor module with advanced networking and high-performance graphics in a modular format that plugs into your custom baseboard.
Features: