|
![]() View Larger Image |
Ordering Information:
| CM-6120A-050 | ETX module with AMD® Geode™ LX800, 500MHz, VGA, TTL LCD, LAN (Realtek® 8139CL+), Audio & SSD |
| CM-6120C-050 | ETX module with AMD® Geode™ LX800, 500MHz, VGA, LVDS, LAN (Realtek® 8139CL+), Audio & SSD |
| System | |
| Audio | Realtek® ALC203 AC97 2.3 compliant codec |
| BIOS | Award® 512KB Flash BIOS |
| Chipset | AMD® Geode™ LX800 + CS5536 |
| CPU | AMD® Geode™ LX800, 500MHz processor |
| Display Function | Chipset: AMD® Geode™ LX800
Memory Size: Share system memory 2 ~ 254MB Resolution: CRT display mode: * 1920 x 1440 x 32bpp at 85Hz * 1600 x 1200 x 32bpp at 100Hz LCD display mode: 1024 x 768 x 16bpp at 60Hz LCD Interface: 18-bit TTL LVDS Interface: 24-bit LVDS panel |
| Environmental | Form Factor: ETX
Dimension ( L x W ): 114mm (L) x 9.4mm (W) (4.5"L x3.7"W) Power Requirement: 6.5W Operating Temperature: 0° ~ 60°C (32°~ 140°F) Operating Humidity: 10% ~ 90% relative humidity, non-condensing Storage Temperature: -20° ~ 85°C (-4°~ 185°F) Storage Humidity: 5% ~ 95% relative humidity, non-condensing |
| Ethernet | Chipset: Intel® 82551ER or Realtek 8139CL+
Ethernet Interface: IEEE 802.3 100Mbps compliant physical layer |
| Expansion Interface | 1 x PCI 2.2 32-bit 33MHz
1 x ISA interface ( no ISA bus master, no PnP support) |
| H/W Status Monitoring | Built in W83627HG supports temperatures and voltages monitoring |
| I/O Chipset | Winbond® W83627HG |
| IDE Interface | 2 x E-IDE (Ultra ATA-66) , 1 x FDD, 2 x RS-232, 1 x IrDA ( 115kbps, 1.0 compliant) |
| Power Connector | Power Supply Voltage: VCC (4.75V ~ 5.25V) |
| System Memory | Onboard 1 x 200-pin DDR SO-DIMM socket supports 333/400MHz memory up to 1GB |
| USB | 4 x USB ports, USB 2.0 compliant |
| Watchdog Timer | 255 levels timer interval, (1 ~ 255 seconds) , setup by software. Jumper set up for system reset or IRQ |
Features: