Embedded Solutions > ETX Board > AW-BS710


Model Number

AW-BS710

Part Number

VTC9869495

Description

Intel Pentium M/Celeron M Processor SOM-ETX with CRT/LVDS, LAN & Audio



View Larger Image

Ordering Information:

AW-BS710A   ETX module with socket type for Intel® Pentium® M/ Celeron® M, CRT, LVDS, LAN & Audio (intel 855GME)
AW-BS710C   ETX module with onboard type for Intel® Celeron® M, 600MHz/512K cache onboard, CRT, LVDS, LAN & Audio (intel 852GM)

System
AudioRealtek® ALC203 AC97 2.3 compliant codec
BIOSAward® 512KB Flash BIOS
ChipsetIntel® 852GM/855GME + ICH4
CPUIntel® Pentium® M / Celeron® M processor, 400MHz FSB
Display FunctionChipset: Built-in 852GM/855GME
Memory Size: Share system memory up to 64MB of dynamic video memory allocaton
Resolution: CRT display mode:
* 1920 x 1440 x 32bpp ( 85Hz)
* 1600 x 1200 x 32bpp ( 100Hz)
LCD display mode: 1024 x 768 @ 16bpp (60Hz)
LVDS Interface: CRT and 18-bit LVDS panel
EnvironmentalForm Factor: ETX
Dimension: (L x W) 114mm (L) x 94mm (W) (4.5"L x3.7"W)
Max. Power Requirement: 6A@5V
Operating Temperature: 0° ~ 60°C (32° ~ 140°F)
Operating Humidity: 10% ~ 90% relative humigity, non-condensing
Storage Temperature: -20° ~ 85°C (-4° ~ 185°F)
Storage Humidity: 5% ~ 95% relative humigity, non-condensing
EthernetChipset: Intel® 82562EM
Ethernet Interface: IEEE 802.3 100Mbps compliant physical layer
Expansion InterfaceETX standard expansion bus
H/W Status MonitoringIRQBuilt-in Winbond® W83627HG chipset, supports temperatures and voltages monitoring
I/O ChipsetSMSC SCH3112
IDE Interface2 x E-IDE (Ultra ATA-66) , 1 x FDD, 2 x RS-232, 1 x IrDA ( 1.1 compliant) , 1 x KB/Mouse
Power ConnectorPower Supply Voltage: +5V (4.75V ~ 5.25V)
System MemoryOnboard 1 x 200-pin DDR SO-DIMM socket supports 266MHz memory max. up to 1GB
USB4 x USB ports, USB 2.0 compliant
Watchdog Timer255 levels timer interval, (1 ~ 255 seconds) , setup by software. Jumper set up for system reset or

Features:

  • 10/100Mbps Ethernet Interface
  • AC 97 Audio
  • Intel® Pentium® M/ Celeron® M processor
  • One 200-pin DDR SO-DIMM Socket supports up to 1GB
  • Supports CRT/LVDS interface