|
View Larger Image |
Ordering Information:
| EP600VEEA-533 | Axiomtek EP600 EPIC SBC with Eden 533 MHz CPU (fanless) onboard, CR T/LVDS LCD, dual Fast, Ethernet and AC’97 audio |
| EP600VEEA-1GE | Axiomtek EP600 EPIC SBC with Eden 1 GHz CPU (fan required) onboard, CRT/LVDS LCD, dual Fast Ethernet and AC’97 audio |
| Display | |
| Chipset | Integrated in VIA Luke |
| Display Interface | * CRT connector for DAC output
* 1st LVDS LCD with 40-pin connector * Optional 2nd LVDS LCD with 40-pin connector |
| Memory | Max. up to 64MB frame buffer sharing system memory |
| Resolutions | * Standard mode:
CRT: 1920 x 1440; 1st LVDS LCD: 1600 x 1200 (single LCD mode), 1024 x 768 (dual LCD mode); 2nd LVDS LCD: 1024 x 768 |
| I/O | |
| Audio | AC’97 codec audio |
| Digital I/O | 4 channel IN and 4 channel OUT |
| Ethernet | 1st as Realtek RTL8100C for Fast Ethernet controller
(optional as RTL8110SC Gigabit Ethernet); 2nd as Realtek RTL8139DL for Fast Ethernet (optional as RTL8110SC Gigabit Ethernet) |
| MIO | 1 x PATA-133 IDE, 1 x SATA-150, 1 x FDD (optional),
1 x PS/2 K/B + MS, 4 x COM (3 x RS-232, 1 x RS-232/422/485), 1 x LPT, 1 x IrDA |
| USB | 4 USB 2.0 ports via box-header for wiring solution |
| System | |
| Battery | Lithium 3V/196 mAH |
| BIOS | Phoenix-Award 4Mbit with RPL/PXE LAN Boot ROM,
SmartView and customer CMOS backup |
| Board Unique ID | Board unique ID (optional) |
| Chipset | VIA Luke+VT8237R Plus+ITE8888G |
| CPU | VIA Luke for ULP Eden 533 MHz/1GHz processor |
| Dimensions | 165 x 115 mm |
| Expansion Interface | PCI-104 for 32-bit PCI expansion; PC/104 for 16-bit ISA
expansion |
| Operating Humidity | Humidity 10% ~ 95% relative humidity, non-condensing |
| Operating Temperature | 0~60°C, operation |
| SSD | CompactFlashTM type-II with DMA supported |
| System Memory | 1 x 200-pin DDR SODIMM max. up to 1GB |
| Watchdog Timer | Reset supported; 255 levels |
Introduction
The EP600 features the low voltage and ultra low voltage VIA Luke compliant processors for fanless operation applications. To meet the original EPIC concept, which features PC/104 expansion capability, the EP600 comes with both PC/104 for 16-bit ISA and PCI104 for 32-bit PCI interfaces. The EP600 is an ideal solution for a single embedded board to support the reliable and anti-vibration PC/104+ expansion. This fanless embedded board also supports 200-pin DDR SODIMM sockets for up to 1GB of DDR400 memory, and supports dual segments with non-ECC memory. Additionally, the function-rich board provides dual fast Ethernet for network communication (optional Gigabit Ethernet), four USB 2.0 ports for high speed peripherals, Digital I/O for industrial control applications, and DualView for both LVDS LCD and CRT displays.
Features: