Reliability you
can count on.
Embedded Solutions > Compact PCI > A6PCI8019
|
 View Larger Image |
| System | |
| Board Size | 6U, single slot |
| Compactflash | PICMG 2.0 R3.0 CompactPCI Spec.PICMG 2.1 R2.0 CompactPCI Hot Swap Spec.PICMG 2.16 Packet Switching Backplane Rev. 1.0PCI Local Bus Specification Rev. 2.2Functions as a transparent bridge when it is a system slot Separated from CompactPCI when it is a peripheral slot (with the exception of power supply and special signals) Signalling level: 3.3/5V (automatic discrimination)32 bit data bus /33MHzDC5.0V±5% max 7A?DC3.3V±5% max 5A |
| CPU | Intel Pentium M processor 745 1.8GHz L1 cache: 32KB/32KB?L2 cache: 2MB Provided with a passive heat sink and is fanless. |
| Front-Panel | Serial port: TIA/EIA-232E?RJ-45 connector×1 Ethernet: 10/100/1000Base-T,RJ-45 connector×2 Graphics: D-sub15 pin/male connector(on-board 855GMCH)USB 2.0x2 |
| Memory | Boot ROM: Firmware hub Flash memory, 1MBMain memory: SO-DIMM sockett×2(supporting max 2GB/PC2700 ECC)1GB module × 1, standard equipment Serial EEPROM: I2C-EEPROM 2K bit |
| Onboard I/O | PMC I/F: 64 bit,66MHz Single Size×1CompactFlash:CF+ & CompactFlashSpec. Rev2.1(module is an option) 2.5 inch HDD I/F: UltraATA/100(HDD is an option) |
| PCI | PCI-X bus: data 64bit/66MHz |
| Power Requirements | DC5.0V±5% max 7A?DC3.3V±5% max 5A |
| Rear I/O | Serial port: TIA/EIA-232E×2(COM1 cannot be used at the same time as the front)Ethernet(PICMG2.16): 10/100/1000Base-T×2 Ethernet: 10/100/1000Base-T×1PS/2 key board I/F · PS/2 mouse I/FUSB 2.0×2, Serial ATA1.0 ×2 |