Embedded Solutions

Embedded Solutions > AdvancedMC > TM1936-CX4


Model Number

TM1936-CX4

Part Number

VTC9870644

Description

AdvancedTCA Switch Blade (10 Gigabit Ethernet) ATS1936 RTM with: • 2 10Gbps CX4 connected to the 3.0 Base Fabric network • 2 RJ45 10/100/1000Mbps ports connected to the 3.0 Base Fabric network • 4 10Gbps CX4 connected to the 3.1 Extended Fabric network • 1 RJ45 Serial management port • 1 RJ45 10/100Mbps out-of-band management port * Contact DTI for custom AMC and RTM options


View Larger Image

Introduction
With DTI’s third generation of Ethernet-based ATCA switch, ATS1936, the focus is on offering flexibility through 10G capabilities and multiple AMC sites. The market has come to rely on DTI as the Leader in ATCA switching, requiring a continuous drive to provide the performance increases required in today’s bandwidth-intensive applications; such as IMS, VoIP, Security, IPTV, and multi-service IP Networks.

Features:

  • 3 mid-size AMC sites: AMC.0 R2.0 compliant,AMC.2 Type 5 (10GbE),AMC.2 Type E1 (1GbE), Telecom clocking (master or linecard), Directly connected AMCs for PCI-E and SAS/SATA
  • ATCA PICMG 3.0/3.1 hub board
  • Base PICMG 3.0 Ethernet interface: 24 1GbE and 3 10GbE ports,Wire-speed performance, Layer 2 switching, Layer 3 routing,Full IPv6 support,L2 and L3 Multicast support,10GbE & 1GbE uplinks
  • Dual image firmware for disaster recovery
  • Dual redundant shelf management controller support (Cross Connect)
  • Fabric 3.1 PICMG 3.1 Option 1 and Option 9 Ethernet interface: 20 1GbE/10GbE ports, Wire-speed performance,Layer 2 switching, Layer 3 routing, Full IPv6 support, L2 and L3 Multicast support, 10GbE up
  • Full 16 slot shelf supported
  • Fully managed solution with SNMP, serial, web interface, telnet, and SSH
  • PICMG 3.0 R2.0 ECN002 compliant
  • Separate control processors for Base and Fabric
  • Various uplink options via front panel and RTM