Reliability you
can count on.
Embedded Solutions > 5.25" Embedded > EBC 580-E10
|
 View Larger Image |
| Display | |
| Chipset | VIA® CN700 / VIA® 8237R+
|
| Display Interface | LVDS1: VIA VT1636 transmitter, 2 x DF13-20 DP, 20-pin connector for LVDS1 panel output
LVDS2: VIA VT1636 transmitter, 2 x DF13-20 DP, 20-pin connector for LVDS2 panel output CCFL: 2 x CCFL for LCD panel backlight inverter power VGA: 1 x DB15 VGA c |
| I/O | |
| Audio | VIA, VT1616 CODEC for AC97 V 2.0
MIC-in, Speaker-out, CD-in, Line-in |
| I/O | Serial port: 4 ports, with 1x 40 pin header, COM 2 for RS 232/422/485
USB 2.0 x 4 Parallel port: 1 port, with 2x13 box header (2.0 mm) PS/2: 1 x Mini-Din for Keyboard/Mouse Digital I/O: 2x4 pin header (2.54 mm) IrDA: on-board pin header for IrDA |
| System | |
| AT Mode | Power Required: +5 V/+12 V
No Power On push Button, No Software Shutdown function and No LAN1 remote wake up |
| ATX Mode | Power required: +12 V/+5 V/+5 Vsb
Supports Power On push Button, Software Shutdown function and LAN1 remote wake up only 2-pin Header for Power On Push Button |
| BIOS | Award System BIOS
Supports Power On after power fail as a BIOS option Supports Wake on LAN 4 Mbit fl ash ROM |
| Certifications | CE approval
FCC Class A |
| CPU | VIA Eden™ V4 1 GHz
VIA C7-D 1.5 GHz |
| Dimensions | 5.25" form factor, 203 mm (L) x 146 mm (W) (7.9" x 5.7")
|
| Ethernet | 2 x 10/100/1000 network connection Realtek RTL8110SC
Each LAN port reserved with 2-pin header for extended LAN LED (Active, Link100, and 1000 LAN LED) Supports Wake on LAN (When 5 Vsb power available). (LAN1 is available for Wake up, LAN2 is not av |
| Input | HDD: 1 x 44-pin connector (secdonary)
1 x internal CF socket |
| Memory | 1 x 184-pin DIMM Socket for up to 1 GB un-buffered non-ECC DDR 333/400 memory |
| Operating Temperature | Board level operating temperature: 0°C to 60°C
Storage temperature: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing) |
| Power Consumption | CPU : VIA C7-D 1.5GHz/400MHz Memory: 1 x DDR 1GB:+12 V +5V; Full-Loading Mode:1.28A 4.17A; Light-Loading Mode:0.36A, 1.71A. NOTE:Full Loading: Utilize CPU 100% with Burn-in test running. Light Loading: Utilize CPU loading below 5% without application |
| Power Supply | 3-pin header for AT/ATX mode switch
+3.3 V is converted from +5 V 6-pin power input connector 3-pin Jst connector to receive the 5 Vsb input from power source Factory default setting is AT Mode |
| RTC | On-chip RTC with battery back up
1 x External Lithium battery |
| System Monitor | Derived from Super I/O to support system monitor
Monitoring of 5 voltages, 3 temperatures and 2 fan speeds. 5 voltage (For +3.3 V, +5 V, +12 V, Vcore and +2.5 V) 3 temperature (For CPU and two external for system) 2 fan speed ( one for CPU and on |
| Watchdog Timer | Watchdog timeout is programmable by software from 1 second to 64 seconds
|
Features:
- 1 x 184-pin DDR DIMM Socket Supports Un-buffered Non-ECC DDR 333/400 up to 1 GB
- 2 x Realtek RTL8110SC Gigabit Ethernet Controller
- CompactFlash Socket
- Supports Dual LVDS Independent Display
- VIA CN700 and 8237 R+ Chipsets
- VIA Eden™/C7 with V4 Bus Processors On-board