Embedded Solutions > 5.25" Embedded > EBC 300


Model Number

EBC 300

Part Number

VTC487773

Description

Nexcom EBC-300 Series 3.5" Wafer Low Power Embedded Board Celeron M 600MHZ, Intel 852GM Chipset with PC 104+, up to 256MB DDR, VGA, Gb LAN, 6x USB, 8x GPIO



View Larger Image

Ordering Information:

EBC 300-C65-256M   Celeron M 600 on board CPU type, Intel 852GM Chipset with PC 104+, 256 MB DDR Max Memory Support, 3.5" Wafer Single Board Computer
EBC 300-SKT-256M   Celeron M 600 on board CPU type, Intel 852GM Chipset with PC 104+, 256 MB DDR Max Memory Support, 3.5" Wafer Single Board Computer

Display
Display InterfaceIntel® 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology; Up to 64 MB of dynamic video memory allocation; 350 MHz integrated 24-bit RAMDAC that can drive a standard progressive scan analog monitor with pixel resolutions up to
System ChipsetIntel® 852GM 400 MHz; Intel® ICH4
I/O
GPIO8 GPIO lines via header (GPI 0 ~ 3 and GPO 0 ~ 3)
Serial Port1 port, with 16 C550 UARTs, 1 x DB-9 Connector
USB 2.06 ports, with two direct output, four from 1x6 JST; On-board 3-pin header for I2C, one pin for GND; On-board 2-pin header for Reset switch
System
BIOSAward system BIOS; ACPI-Only supports Software Shutdown by 5 Vsb Provided (S0 /S5 only); Advanced Power Management support; 4Mbit flash ROM; Supports Pentium M Speed Step (Customized by Nexcom); Supports Automatic Power On Function
CertificationsCE approval; FCC Class A
Compactflash1x Internal CompactFlash socket; Support One Type I& II Compact Flash Card (Primary Master)
CPUSupports Intel® Celeron® M 600 MHz processor with 512 KB L2 cache and 400 MHz FSB; Support for Intel® Pentium® M processor or Intel® Celeron® M processor in 478-pin, Micro-FCPGA package (mPGA479M Socket)
Dimensions3.5" form factor, 146 mm (L) x 105 mm (W) (5.7" x 4.1")
EthernetRealtek RTL 8110SC Gigabit Ethernet Controller; 1 x RJ45 with LED; Supports PXE LAN boot ROM for Ethernet Boot up; Supports Wake on LAN (When 5 Vsb power available)
IDE1 x 44-pin IDE connector
MemoryOn-board 256 MB Non-ECC DDR SDRAM memory
Operating Temperature0°C to 60°C
Power SupplySupports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 1.7 G Memory: On board DDR 256 MB:+12V +5V; Full-Loading Mode(A):0.2 A 6.2A; Light loading Mode(A):0.2A 2.5A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running.
Relative humidityOperating 10% to 90%, non-condensing; Non-operating 5% to 95%, non-condensing
RTCOn-chip RTC with battery back up; 1 x External Li-Ion battery - The battery socket is in flat direction; Tolerance less than 2 sec (24 hours) under 25°C environment
Storage temperatures-20°C to 85°C
System MonitorDerived from Super I/O to support system voltage, fan speed, temperature monitoring

Introduction
The Nexcom EBC 300 Series is a 3.5" embedded board with an on-board Intel® Celeron® M 600MHz processor with 512 KB L2 cache or socket Pentium® M/Celeron® M with400 MHz FSB.

The EBC 300 features Intel® 852GM and ICH4 chipsets, which supports DDR 200/266 memory, along with integrated graphics with 64 MB shared memory to support CRT and LVDS function.

The South Bridge ICH4 provides a 44-pin IDE connector, CompactFlash socket, two serial ports, six USB 2.0 ports, one Gigabit Ethernet LAN port, and an audio interface.

The EBC 300 is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support.

Features:

  • Audio with Speaker-out, Line-in and Mic-in
  • Intel® 852GM and ICH4 Chipset
  • On-board 256 MB DDR Memory
  • On-board Intel® Celeron® M 600 MHz Processor with 512 KB L2 Cache
  • Realtek RTL 8110SC Gigabit Ethernet Controller
  • Supports LVDS/ 6 x USB 2.0