|
![]() View Larger Image |
Ordering Information:
| EBC 320-LX8 | 3.5" On-board AMD Geode™ LX800 with PCI 104/ CRT/ TTL |
| Display | |
| Chipset | AMD Geode LX800 / AMD CS 5536
|
| Display Interface | The Geode™ LX800 integrated Graphic, supports both standard VGA and TFT
CRT Supports up to 1920x1440x32 bpp at 85 Hz 1 x DB15 VGA Connector TTL LCD supports up to 24bit, 1600x1200x32 bpp at 60 Hz for TFT |
| I/O | |
| Audio | REALTEK,ALC203 CODEC for AC97 v. 2.0
Mic in and Speaker out connector, Line in with pin header |
| I/O | 4 x USB 2.0 port (USB 1/2 on front, USB 3/4 via one JST connector), bandwidth:480 Mb/s
2 x SIO, 16C550 UARTs (One on DB9 edge connector support RS-232, one onboard with pin header support RS-232/422/485) Parallel ports:Bi-directional, EPP/ECP suppo |
| System | |
| BIOS | Award system BIOS
Plug & Play support Advanced Power Management and Advanced Confi guration & Power Interface support 4M bits fl ash ROM ACPI ACPI support: Only support Software Shutdown by 5Vsb Provided |
| Certifications | CE approval
FCC Class A |
| CPU | AMD Geode™ LX800,500 MHz on Board
128 KB L2 cache (64 KB I-cache/64 KB D-cache) |
| Dimensions | 3.5" form factor, 146 mm (L) x 105 mm (W) (5.7”x 4.1”)
|
| Ethernet | 1 x Realtek 8139C+ 10/100 Fast Ethernet Controller
Supports Boot From LAN (PXE) Supports Wake on LAN by 5usb provided 1 x RJ45 with LED |
| Input | CF: 1x Internal CompactFlash socket Support One Type I& II Compact Flash Card (Primary Master)
IDE: 1 x 44-pin IDE connector,support Ultra DMA 33/66/100, 1 x 2-pin IDE Active LED Header |
| Memory | 1 x 200-pin SO-DIMM socket, up to 1GB Non-ECC/Non-Registered DDR SDRAM (64-bit, 200 MHz)
|
| Operating Temperature | Board level operating temperature:0°C to 60°C
Storage temperature:-20°C to 85°C Relative humidity: 10% to 90% (Non-condensing) |
| Power Supply | Supports both AT and ATX Mode (BIOS and H/W is default to AT mode)
AT Mode: +5V Power in,No Power On push Button, Software Shutdown function and LAN remote wake up. Power requirement:+5V; Full-Loading Mode:1.55A; Light loading Mode:1A ATX Mode: Pow |
| RTC | On chip RTC with battery back up
1 x External Li-ion Battery |
| Watchdog Timer | Watchdog Timer is programmable by software from 0 to 255 seconds and from 0 minute to 255 minute (Tolerance 15% under room temperature 25°C)
|
Features: