Reliability you
can count on.
Embedded Solutions > 3.5" Embedded > EBC 301
|
 View Larger Image |
Ordering Information:
| EBC 301-SKT-512M | 3.5" Pentium® M/ Celeron® M Embedded CPU board with Gigabit LAN |
| General | |
| Operating Temperature | -20°C to 60°C for Board Level Only |
| Storage Temp | -20°C to 85°C |
| Display | |
| Chipset | Intel® 910GMLE chipset (compatible with 915GME chipset); Intel® ICH6M (82801FBM) |
| Display Interface | Intel® 910GMLE (915GME) integrated graphics solution w/ Intel® Extreme Graphics 2 technology; Intel DVMT video memory allocation; 350-MHz integrated 24-bit RAMDAC that can drive a standard progressive scan analog monitor with pixel resolution up to 1 |
| I/O | |
| GPIO | 8 GPIO, 10-pin(2x5) 2.0mm header (GPI 0 ~ 3 and GPO0 ~ 3), TTL Level (0/5 V); One 1x2 2.54mm therma |
| Serial Port | 2 ports, 1 x DB-9 Connector and one 2x5 2.0mm Box Header |
| USB | USB 2.0 x 4 ports, 2 ports edge connector, 2 ports by 6-pin 2.0mm Jst connector |
| System | |
| BIOS | Award System BIOS; Advanced Power Management support; 4M bits flash ROM; Only support Software Shutdown by 5Vsb Provided (S0 /S5 only) |
| Certifications | CE approval; FCC Class A |
| CPU | Support Intel® Pentium® M processor or Intel® Celeron® M processor in PGA and BGA Type |
| Dimensions | 3.5" form factor - 146mm(L) x 105mm(W) (5.7” x 4.1") |
| Ethernet | Realtek 8111C-GR PCI Express GbE controller; 1 x RJ45 with LED connector; Support PXE LAN boot ROM for Ethernet Boot up; Support Wake on LAN (By 5Vsb Provided) |
| Memory | On-board default 512 MB DDR2 Memory Max.; Support up to 1GB by Manufacture Option |
| Power Supply | AT Mode - Single 5V input, CPU:P-M 2.0G Memory: On board DDR2 1GB:+5V; Full-Loading Mode - 4A; Light loading Mode - 3A; ATX Mode - Aux input connector for +5Vsb, +12V, -12V, -5V as ATX mode application; Support Remote Power ON/ Software Shutdown/ RTC alarm |
| Relative humidity | Operating - 10%~90%, non-condensing; Non-operating - 5%~95%, non-condensing |
| RTC | On chip RTC with battery back up; External Li-Lon Battery |
| SATA Interface | 1 x SATA Connector; CF socket support through optional module EBK 301-C2 |
| System Monitor | 3 voltage: +3.3V, +5V, Vcore; 2 Temperatures - CPU, System; 1 FANs speed - CPU FANs |
| Watchdog Timer | Watchdog timer is programmable by Software from 1 mins to 255 mins or 1 sec. to 255 sec., (Tolerance 15% under room temp. 25°C) |
Introduction
The Nexcom EBC 301 Series is a 3.5” ECX embedded board with Intel® Celeron® M/Pentium® M processor support.
The EBC 301 Series features Intel® 915GME or 910GMLE and ICH6M chipsets, which supports DDR2 memory, along with integrated graphics with DVMT memory to support CRT and LVDS function and dual independent display capability.
The South Bridge ICH6M provides, serial port, four USB 2.0 ports, and one Gigabit Ethernet LAN port. With the ECX multi I/O connector for the extra interface, such as, 4 x USB, 1 x LPC, 2 x PCI Master, AC97 Audio Codec, 1 x PCI Express, and SDVO, which will provide dedicated application required features under such small form factor.
The EBC 301 is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support.
Features:
- 3.5 ECX Form Factor
- ECX Multi I/O Expansion for Add-on Modules
- Intel Pentium® M/ Celeron® M Procesors
- Intel® 910GMLE or 915GME Chipset
- Max. Support up to 1GB by Manufacture Option
- On-board Default 512 MB DDR2 Memory
- Realtek 8111C-GR PCI Express GbE Controller
- Single +5V AT Mode Power Input Design
- Supports Both ATX or AT Power Mode
- Supports LVDS/ CRT Dual Independent Display