|
| |
|
 |
VIA C3 EBGA CPU 667Mhz on board, support 733/800+ MHz at 100/133MHz
FSB |
|
|
Scaleable CPU speed, CPU fanless support up to 400MHz |
|
|
Max. 512MB SDRAM, DIMM x1 |
|
|
VIA Twister 8606/686B chipsets w/ 4x AGP VGA built-in |
|
|
3D graphic, LVDS/TTL LCD interface |
|
|
Special module to support Dual LCD Display |
|
|
Realtek 8139C+ 10/100 Base T/TX LAN |
|
|
AC 97 ver. 2.0 Audio |
|
|
|
System
Architecture
- Main board with standard 5.25" drive form factor
- On board VIA C3 Processor EBGA package with 128KB Level 1 and 64 KB
level 2 cache
- FSB 100/133MHz
- PCI V2.2 compliant
CPU
support
- Onboard VIA C3 Processor EBGA Package with 128KB Level 1 and 64KB
Level 2 Cache
- 667MHz CPU ob board, and feature VIA C3 series CPU with EBGA Package
speed up to 733/800+MHz by CPU FSB 100/133MHz
- CPU Fan-less feature by lower down the CPU Clock Ratio to 400MHz
Memory
- One 168-pin DIMM. Support Max memory size to 512 MB
BIOS
- Award system BIOS
- Optional ACPI Support
- Advanced power management support
- 4M bits flash ROM
Chip
Set
- VIA 8606 (Twister T) 100 /133 MHz North Bridge
- VIA VT82C686b PSIPC PCI SUPER-I/O integrated peripheral controller
- PCI V2.2 compliant
On
Board LAN
- Realtek RTL 8139C Ethernet Controller x2
- Single Chip 10 /100 Base TX support, full duplex
- Compliant with IEEE802.3X
- Boot from LAN function
- Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT,
Netware, SCO Open Server 5.0, Linux 7.2 or later, FreeBSD
- RJ45 with LED connector x2
On
Board Audio
- VT82C686A and AC97 ver. 2.0 compliant interface, Multi-stream Direct
Sound and Direct Sound 3D acceleration
- Audio interface:
CD audio in (Internal),
Microphone in, Line in, Speaker out (with Amplifier)
- VIA VT82C686b PSIPC PCI SUPER-I/O integrated peripheral controller
- PCI V2.2 compliant
On
Board VGA (Hardware Disable is available)
- VIA 8606 Integrated Savage4 2D/3D/Video Accelerator
- Optimized Shared Memory Architecture (SMA)
- 8/16/32MB frame buffer using system memory
- Single cycle 128-bit 3D architecture
- Full internal AGP 4x performance
- Next generation, 128-bit 2D graphics engine
- High quality DVD video playback
- 2D/3D resolutions up to 1920x1440
- Extensive LCD Support
- 36-bit DSTN/TFT flat panel interface with 256 gray shade support
- Integrated 110 MHz LVDS interface
- Support for all resolutions up to 1600x1200
- Drivers support: Windows® 95/98/2000, Windows® NT4.0, Linux
- 15Pin D-Sub VGA Output
- LVDS Interface Connector x1
- TTL LCD Interface Connector x1
Optional PCI VGA Module support Dual LCD Display (EBK LCD2)
- NEXCOM Proprietary PCI Interface
- SMI 721 with 4MB memory on die; 200MHz 24-bit RAMDAC, High
performance, power managed 3D/2D
- 40pin and 26pin TTL Panel Interface Connector support Dual LCD Display
On
Board IDE Interface
- VIA 686B South Bridge Integrated UltraDMA-33/66/100 master mode EIDE
controller
- Support UltraDMA-33/66/100 IDE with 40 pin connector x1
- One 44 pin IDE connector for 2.5" HDD or DOM (Disk On Module)
- Internal Compact Flash socket x1
On
Chip and On board I/O
- SIO x 4, with 4x16C550 UARTs, 10 pin 2.0 (or 2.54) header with housing
x4; one for RS422/485SIO x2, with 2x16C550 UARTs, 10 pin header x1, D-Sub
x1
- PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1
- Floppy Disk controller: 34 pin connector x 1
- 6 pin mini DIN connector x 1, for PS/2 keyboard/mouse
- On board USB port x 2
- On Board buzzer x 1
- Digital I/O: 8 x TTL DIO
- GPIO (4 in 4 out)
- On board 3 pin header for I2C, one pin for GND
- On board 5 pin header for IrDA Tx Rx
- On Board 2 pin header for Reset SW
- On Board 2 pin header for power SW (ATX Mode)
- On Board 2 pin Power LED Header
- 2 pin Power Header x 1 for LCD Panel Backlight
- COM 3 reserved the RING pin to power Touch Screen LCD (jumper select 5
or 12V or ring)
- 3 pin Power Connector x2 for CPU FAN and Chassis FAN
- 2 Pin IDE Active LED Header
Real
Time Clocker
- On chip RTC with battery back up
- External Li Battery x1
Watchdog Timer
- Watchdog timeout can be programmable by Software from 0.5 to 64 second
On
Board Bus Expansion
- One 32bit/33MHz PCI Slot support PCI Expansion
- PC 104
- NEXCOM Proprietary PCI Interface
Dimensions
System Monitor
- Derived from Super IO to support system monitor
- 5 voltage (For +3.3V, +5V, +5Vsb, +12V, Vcore and Vtt)
- Two Fan speed (For CPU and Chassis)
- Two temperature
- Drivers support: Windows® 95/98/2000, Windows® NT4.0
Power Source & Power Requirements
- 6 PIN Power Input Connector
| PIN Define |
Voltage |
Power Requirement |
| PIN 1 |
+5V |
64A (typical) |
| PIN 2 |
+5V |
| PIN 3 |
GND |
-- |
| PIN 4 |
GND |
-- |
| PIN 5 |
GND |
-- |
| PIN 6 |
+12V |
1A (typical) |
- Accessory Power Converter Cable:
- Two 4P to 6P (For AT Power Supply)
- ATX Power Connector to 6P+ 2 Pin Power SW (For ATX Power Supply)
- Optional Power Module to support NoteBook Type Adapter (16Vdc ~
24Vdc input)
Environments
- Operating temperatures: 0°C to 60°C
- Storage temperatures: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
Certification
EBC 569
-
- 5.25" Low
Power Embedded Board with on board 667+MHz CPU
EBC 569V2
-
- 5.25" Low
Power Embedded Board with on board 667+MHz CPU w/ PCI VGA Module to
support Dual LCD Display Function
Note: EBC 569V2= EBC569 + EBK LCD2
|
|
|
Related