|
| |
|
NEX
Embedded Single Board Computer Series
|
|
|
 |
VIA C3 EBGA CPU 800MHz on board, VIA C3 series CPU with EBGA Package
at FSB 100/133MHz FSB |
|
|
CPU fan-less support up to 400MHz |
|
|
Max. 512MB SDRAM, DIMM x1 |
|
|
VIA Twister 8606/686B chipsets w/ 4X AGP VGA built-in |
|
|
3D graphic, LVDS/TTL LCD interface |
|
|
Realtek 8139C 10/100 Base T/TX LAN |
|
|
AC 97 ver. 2.0 Audio |
|
|
TV output/IEEE 1394/USB |
|
|
|
System
Architecture
- 3.5" small form factor with Dimensions: 143 x 102 mm
- On board VIA C3 Processor EBGA package with 128KB Level 1 and 64 KB
level 2 cache
- FSB 100/133MHz
- PCI V2.2 compliant
CPU
support
- Onboard VIA C3 Processor EBGA Package with 128KB Level 1 and 64KB
Level 2 Cache
- 800MHz CPU ob board by CPU FSB 100/133MHz
- Ultra Low Power CPU Fan-less feature at CPU speed 400MHz
Memory
- One 144-pin SO-DIMM. Support Max memory size to 512MB
BIOS
- Award system BIOS
- Optional ACPI Support
- Advanced power management support
- 4M bits flash ROM
Chipset
- VIA 8606 (Twister T) 100 /133 MHz North Bridge
- VIA VT82C686B PCI SUPER-I/O integrated peripheral controller
- PCI V2.2 compliant
On
board LAN
- RealTek RTL8139C Ethernet Controller x1
- Single Chip 10 /100 Base TX support, full duplex
- Compliant with IEEE802.3X
- Boot from LAN function
- Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT,
Netware, SCO Open Server 5.0, Linux 7.2 or later, FreeBSD
- RJ45 with LED connector x1
On
Board Audio
- VT82C686B and AC97 ver. 2.0 compliant interface, Multi-stream Direct
Sound and Direct Sound 3D acceleration
- Audio interface:
CD audio in, Line in (Internal connector)
Microphone in, Speaker out (with Amplifier)
On
Board VGA
- VIA 8606 Integrated Savage4 2D/3D/Video Accelerator
- Optimized Shared Memory Architecture (SMA)
- 8/16/32MB frame buffer using system memory
- Single cycle 128-bit 3D architecture
- Full internal AGP 4x performance
- Next generation, 128-bit 2D graphics engine
- High quality DVD video playback
- 2D/3D resolutions up to 1920x1440
- 3D Rendering Features
- Extensive LCD Support
- 36-bit DSTN/TFT flat panel interface with 256 gray shade support
- Integrated 110 MHz LVDS interface
- Support for all resolutions up to 1600x1200
- Drivers support: Windows® 95/98/2000, Windows® NT4.0, Linux
- 15Pin D-Sub VGA Output
- LVDS Interface Connector x1
- TTL LCD Interface Connector x1
On
Board External TV Encoder Interface
- TV encoder
- Multiplexed for RCA TV out or S-Video output
- Supports NTSC, NTSC-EIA (Japan) and PAL TV formats
On
Board IEEE1394
- VIA Fire II VT6306
- IEEE 1394-1394A compliant
- OHCI compatible programming interface
- 100/200/400 Mbps data transfer rates
- PCI 2.1 interface
- 1394 Port x3 (one direct output, 2 port by Pin Header reserved)
On
Board IDE Interface
- VIA 686B South Bridge Integrated UltraDMA-33/66/100 master mode EIDE
controller
- Support UltraDMA-33/66/100 IDE with 44 pin connector x1
- Internal Compact Flash socket x1
On
Board Bus Expansion
- NEXCOM PCI Proprietary Connector for PCI devices
- PC/104 connector: One 16-bit 104-pin connector onboard
Dimensions
On
Chip and On board I/O
- SIO x2, with 4x16C550 UARTs, 10 pin header (2.0mm) x2 ; one for
RS422/485
- PIO x1, bi-directional, EPP/ECP support, 26 pin connector x1
- 6 pin mini DIN connector x1, for PS/2 keyboard/mouse
- On board USB port x2
- On Board buzzer x1
- Digital I/O TTL level (4 in 4 out)
- On board 3 pin header for I2C, one pin for GND
- On board 5 pin header for IrDA Tx Rx
- On Board 2 pin header for Reset SW
- On Board 2 pin header for power SW (ATX Mode)
- On Board 2 pin Power LED Header
- 2 pin Power Header x1 for Panel (5V or 3.3V)
- 3 pin Power Connector x2 for CPU FAN and Chassis FAN
- 2 Pin IDE Active LED Header
Real
Time Clocker
- On chip RTC with battery back up
- External Li Battery x1
Watchdog Timer
- Watchdog timeout can be programmable by Software
System Monitor
- Derived from Super IO to support system monitor
- 5 voltage (For +3.3V, +5V, +5Vsb, +12V, Vcore and Vtt)
- Two Fan speed (For CPU and Chassis)
- Two temperature
- Drivers support: Windows® 95/98/2000, Windows® NT4.0
Power Source & Power Requirements
- 6 PIN Power Input Connector
| PIN Define |
Voltage |
Power Requirement |
| PIN 1 |
+5V |
6A (typical) |
| PIN 2 |
+5V |
| PIN 3 |
GND |
-- |
| PIN 4 |
GND |
-- |
| PIN 5 |
GND |
-- |
| PIN 6 |
+12V |
1A (typical) |
- Reserve 2 pin Header for +5Vsb to support ACPI function
- 3.3V is converted from +5V
- Accessory Power Converter Cable:
- Two 4P to 6P (For AT Power Supply)
- ATX Power Connector to 6P+ 2 Pin Power SW (For ATX Power Supply)
Environments
- Operating temperatures: 0°C to 60°C
- Storage temperatures: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
Certification
EBC 363
-
- 3.5" Low
Power Embedded Board with on board 800MHz CPU
EBC 363LP
-
- 3.5" Ultra
Low Power Embedded Board with on board 400MHz CPU
|
|
 |
Back
to Home |
 E-Mail
|
VoxTechnologies Corp. - Industrial
Computer Leader
Tel: 972-234-4343 Fax: 972-234-4295 Toll-Free:
1-888-568-6224 |
|
Related