|
Home
Up
Search
Industrial Products
MCH226-ATX
MCH218
MCH218-ATX
MCH224
MCH224-ATX
| |
|
MIT
Chassis Series
|
| Industrial
Computer Chassis Series |
 |
| Products
Overview |
2U
Rackmount Chassis
|
| MCH226-ATX
19" 2U Rackmount Motherboard Chassis |
|
|
| Features: |
 |
Datasheet |
|
19" 2U rugged heavy-duty SPCC steel chassis meets the EIA
RS-310C standard
Removable mounting
trays design that supports IDE or hot-swappable* SCA-SCSI hard disk for easy data
maintenance
Supports any compatible
Extended ATX/ATX/MicroATX form factor motherboard sized up to 12" x 13"
Built-in highly
efficient standard compact-sized 300W ATX power supply with PFC and AC auto sensing that is
UL, CSA, TUV and CE certified or optional power supply choices
of 400W ATX or (2) 300W ATX redundant *
With optional riser
card1 design allows plugging-in up to 3 add-on
cards that maximize space utilization for future
expansion with choices of 3-slot PCI, 3-slot PCI with RAID port III
or 1 PCI/1 shared PCI/ISA slots
Capable of
accommodating one 5.25", one half-height 3.5" front accessible disk drives and 4
(1.6"-height) or 6 (1"-height) 3.5" hot-swappable
SCA-SCSI or IDE removable
disk drives
One power-on/off
switch, one reset switch, three LED indicators are protected by a detachable, lockable front
door panel
Three high-speed ball
bearing cooling fans provide excellent airflow to dissipate heat from the chassis and front
replaceable filter design protects system against dust
Rear I/O plate cutout
design supports standard ATX 2.01 spec of I/O shield, plus reserved 3-slot opening for
use with optional riser card in the rear of the chassis
Dimensions (W x D x H):
19" x 25.60" x 3.47" (482.6 x 650 x 88 mm) |
| MCH218
19" 2U Rackmount SBC Chassis |
|
|
| Features: |
|
Datasheet |
|
19" 2U rugged heavy-duty SECC steel chassis meets the EIA
RS-310C standard
Supports up to 6
full-sized cards with industrial butterfly passive backplane choices
With standard 200W AC
AT power supply, optional 300W, 400W, (2) 300W Mini-redundant, 24V DC, or -48V DC
AT power supplies available
Capable of
accommodating one 5.25" and one half-height 3.5"
front accessible disk drives and one half-height
3.5" internal disk drive
Shock-resistant drive
bays and lockable door design to protect storage devices against vibration and dust
Reserved ports for one
9-pin and one 25-pin D-type connectors in the rear of the chassis
One power-on switch,
one reset switch, dual HDD/power and one power fault LED indicators and one AT keyboard
connector are behind the lockable door
Dual high-speed ball
bearing cooling fans with hot-swappable design provides excellent airflow to dissipate
heat from the chassis, plus washable easy-to-clean dust filter
Supports side slide
rail mounting and removable handle design
Dimensions (W x D x H):
19" x 18" x 3.46" (481.1 x 457.2 x 88 mm) |
| MCH218-ATX
19" 2U Rackmount Motherboard Chassis |
|
|
| Features: |
|
Datasheet |
|
19" 2U rugged heavy-duty SECC steel chassis meets the EIA
RS-310C standard
Supports ATX or Micro
ATX form factor compatible motherboard with custom-made I/O shield
With standard 300W AC
ATX power supply or optional 400W AC ATX power supply
Capable of
accommodating one 5.25" and one half-height 3.5"
front accessible disk drives and four half-height
3.5" internal disk drive
Shock-resistant drive
bays and lockable door design to protect storage devices against vibration and dust
One power-on switch,
one reset switch, one HDD/power LED indicators and one AT keyboard connector are behind
the lockable door
Two high-speed ball
bearing cooling fans with hot-swappable design provides excellent airflow to dissipate
heat from the chassis, plus washable easy-to-clean dust filter
Supports side slide
rail mounting and removable handle design
Dimensions (W x D x H):
19" x 18" x 3.46" (481.1 x 457.2 x 88 mm) |
| MCH224
19" 2U Rackmount SBC Chassis |
|
|
| Features: |
|
Datasheet |
|
19" 2U rugged heavy-duty SECC steel chassis meets the EIA
RS-310C standard
Supports up to 6
full-sized cards with industrial butterfly passive backplane choices
With standard 300W AC
AT power supply, optional 400W, (2) 300W Mini-redundant, 24V DC, or -48V DC AT power
supplies available
Capable of
accommodating one 5.25" and one half-height 3.5"
front accessible disk drives and six half-height
3.5" internal disk drive
Shock-resistant drive
bays and lockable door design to protect storage devices against vibration and dust
Reserved ports for one
9-pin and one 25-pin D-type connectors in the rear of the chassis
One power-on switch,
one reset switch, dual HDD/power and one power fault LED indicators and one AT keyboard
connector are behind the lockable door
Dual high-speed ball
bearing cooling fans with hot-swappable design provides excellent airflow to dissipate
heat from the chassis, plus washable easy-to-clean dust filter
Supports side slide
rail mounting and removable handle design
Dimensions (W x D x H):
19" x 24" x 3.46" (481.1 x 609.6 x 88 mm) |
| MCH224-ATX
19" 2U Rackmount Motherboard Chassis |
|
|
| Features: |
|
Datasheet |
|
19" 2U rugged heavy-duty SECC steel chassis meets the EIA
RS-310C standard
Supports ATX or Micro
ATX form factor compatible motherboard with custom-made I/O shield
With standard 300W AC
ATX power supply or optional 400W, (2) 300W Redundant ATX power supply choices, please
contact our sales rep. for availability
Capable of
accommodating one 5.25" and one half-height 3.5"
front accessible disk drives and six half-height
3.5" internal disk drive
Shock-resistant drive
bays and lockable door design to protect storage devices against vibration and dust
One power-on switch,
one reset switch, one HDD/power LED indicators and one AT keyboard connector are behind
the lockable door
Five high-speed ball
bearing cooling fans with (2) hot-swappable fan design provides excellent airflow to
dissipate heat from the chassis, plus washable easy-to-clean dust filter
Supports side slide
rail mounting and removable handle design
Dimensions (W x D x H):
19" x 24" x 3.46" (481.1 x 609.6 x 88 mm) |
|
|
