 19" 1U rugged heavy-duty SPCC steel chassis meets the EIA RS-310C standard
Easy-to-assembly removable
mounting tray design that supports any compatible ATX/MicroATX form factor motherboard
Built-in highly efficient
standard compact-sized 150W ATX power supply with AC auto switching that is UL, CSA, TUV and CE approved
Capable of accommodating one
5.25" and one half-height 3.5" front accessible disk drives and one half-height 3.5" and
2.5" internal disk drives
One power-on/off switch, one
reset switch, three LED indicators, one PS/2 keyboard connector and one 9-pin COM port are protected
by a detachable, non-screwdriver-to-open front door panel
Three high-speed ball bearing
cooling fans (two in front with dust filter and one in the rear) provides excellent airflow to dissipate
heat from the chassis
Supports an optional 1-slot
PCI riser card1
for future expansion.
Custom I/O plate design
supports any Intel CA810 compatible motherboard with VGA/USB/LAN/Audio/AUX and PS/2 mouse/KB ports, one Printer and one COM ports, plus reserved one slot
opening for use with optional riser card in the rear of the chassis
Dimensions (W x D x H):
19" x 19" x 1.73" (482.6 x 482.6 x 44 mm)
Note:
1. The maximum clearance space is limited by height of 1U
chassis and both on-board components on motherboard and selected
add-on card. Available slot expansion is determined by above condition.
|
