|
|
FEATURES |
- 19" 6U Rackmount chassis
with several options for ATX motherboard or 20 slots Backplane,
general purpose power supply or redundant power supply
- Heavy duty steel for harsh
industrial
- Support total six 5.25"
drive spaces. Among of these drive bays, there are three
5.25" drive bays can also be supported three 3.5" HDD.
And another one 5.25" drive bay can be supported one
3.5" HDD
- Special design of the fans module
at the front panel. It is easy and convenience for user to
exchange fans by just loosing two screws at the front side without
pull out the chassis and open the top over
- Increasing the air hole on both
left and right lateral side, enhance the air ventilation system
- Module design of the top Backplane
layer in order to simplify the installation of Backplane and the power supply which located at the bottom layer
|
|
SPECIFICATION |
| Construction |
Heavy
duty steel, 19" Rackmount 6U chassis |
| Color |
Black |
| Disk
Drive Bays |
Support
3.5" FDD x 1 (or 3.5" HDD x 1 or 5.25" x 1) + 3.5"
HDD x 3 (or 5.25" drive x 3) + 5.25" drive x 2 |
| Cooling
Fan |
IACC607AX/IACC620A
- Four 8cm DC Fans (38.6 CFM ea.) at the front side and one
8cm DC Fan at the rear side
IACC607RX/IACC620AR
- Four 8cm DC Fans (38.6 CFM ea.) at the front side and two
4cm DC Fans (10.7 CFM ea.) at the rear side |
| Controls |
Power
ON/OFF, RESET switches |
| Status
Indicators |
Power
ON/OFF, HDD and LAN status |
| Speaker |
One
Internal Speaker |
| Dimension
(H x W x D) |
|
| Motherboard/backplane
Option |
IACC607AX
- Supports Micro-ATX / ATX / Entend-ATX motherboard
IACC607RX - Supports Micro-ATX / ATX / Entend-ATX motherboard
IACC620A - Supports 20-slots backplane
IACC620AR - Supports 20-slots backplane |
| Power
Supply |
IACC607AX
- Supports ATX / Redundant ATX power supply
IACC607RX - Supports Redundant power supply
IACC620A - Supports ATX / Redundant ATX power supply
IACC620AR - Supports Redundant power supply |
|
Environmental Specification |
| Operating
Temperature |
0˘XC
~ 50˘XC (32˘XF ~ 122˘XF) |
| Relative
Humidity |
5%
~ 95%, non-condensing |
| Altitude |
10,000ft
(3,000m) |
| Vibration |
1.5G
Max and 0.1" p-p at 5 to 500Hz |
| Shock |
10G
peak acceleration (10m/sec) |
| Safety |
Meets
UL, CSA, and TUV |
| EMI |
FCC
Class A and CE |
