|
| |
|
-
IAC Chassis -
19" 4U Rackmount Chassis
IACC420AR-400
|
|
|
|
FEATURES |
- Meets EIA RS-310C Rackmount
standard
- Fault detection and alarm
notification function for temperature, voltage & fans
monitoring
- The temperature sensor is
provided with alarm function on the system monitoring board.
Users can set the chassis alarm temperature. When over heat
is detected, an audible alarm will alert user
- 4 LED indicators on the front
panel shows the status of +5V, -5V, +12V & -12V voltage
- Three stages of the fan running
speed controlled by the presetting temperature provides users the
most cost effective of power consumption
- Supports Hot-Swap redundant power
supply
- Hold-down clamp designed to
protect the plug-in card
- Removable disk drive bay with
shock-resistant design
|
|
SPECIFICATION |
| Construction |
Heavy duty
steel, 19" Rackmount chassis |
| Disk
Drive Bays |
Support one
fixed 3.5" drive, one removable 3.5" drive and three
5.25" removable drives |
| Cooling
Fan |
Two 12cm DC
fans (86.5 CFM ea.) |
| Air
Filter |
Changeable
filter behind ventilation cuts |
| Keyboard
Connector |
One DIN
connector at the rear panel |
| Controls |
Power ON/OFF,
RESET, Key Lock buttons |
| Status
Indicators |
Power ON/OFF,
HDD status, voltages status, fan status, temperature status |
| Dimension
(H x W x D) |
177 x 482 x
673.9mm (6.97" x 18.98" x 26.53") |
| Weight |
16.5kgs (36.4
lbs) |
| Passive
Backplanes Option |
Support 20 slot
ISA or 19 slot PICMG PCI/ISA backplane |
| Power
Supply |
AT type
redundant power supply |
|
Environmental Specification |
| Operating
Temperature |
0˘XC ~ 50˘XC
(32˘XF ~ 122˘XF) |
| Relative
Humidity |
5% ~ 95%,
non-condensing |
| Altitude |
10,000ft
(3,000m) |
| Vibration |
1.5G Max and
0.1" p-p at 5 to 500Hz |
| Shock |
10G peak
acceleration (10m/sec) |
| Safety |
Meets UL, CSA,
and TUV |
| EMI |
FCC Class A ad
CE |
|
|
| Ordering
Information |
| Model |
Backplane
Option |
W/
Power Supply |
|
IACC420AR-300
|
APSL20
APPSL19A
APPSL19S
|
300W, AT Redundant,
EPR2302S
|
|
IACC420AR-400
|
400W, AT Redundant,
EPR2402S
|
| Note: The power
source of Intelligent module is from the power terminal of backplane |
|
| Notes: |
- Trademarks:
All names of products appearing in this page are the registered
trademark of their respective owners, organizations and companies.
- Detailed
Specification and Chassis Drawing in *pdf format:
Click
- To view *.pdf
files, click on
|
|
