|
|
FEATURES |
- Meets EIA RS-310C Rackmount
standard
- Fault detection and alarm
notification function for temperature, voltage & fans
monitoring
- The temperature sensor is
provided with alarm function on the system monitoring board.
Users can set the chassis alarm temperature. When over heat
is detected, an audible alarm will alert user
- 4 LED indicators on the front
panel shows the status of +5V, -5V, +12V & -12V voltage
- Three stages of the fan running
speed controlled by the presetting temperature provides users the
most cost effective of power consumption
- Supports PS/2 type & ATX or
Hot-Swap redundant power supply
- Hold-down clamp designed to
protect the plug-in card
- Removable disk drive bay with
shock-resistant design
|
|
SPECIFICATION |
| Construction |
Heavy
duty steel, 19" Rackmount chassis |
| Disk
Drive Bays |
Support
one fixed 3.5" drive, one removable 3.5" drive and trhee
5.25" removable drives |
| Cooling
Fan |
One
12cm DC Fans (86.5 CFM)
One (optional) 8cm DC Fans (35.3 CFM) |
| Air
Filter |
One
removable filter at front panel |
| Keyboard
Connector |
One
DIN connector at the front panel |
| Controls |
Power
ON/OFF, RESET, Key Lock button |
| Status
Indicators |
Power
ON/OFF, HDD status, fan status, voltages status |
| Dimension
(H x W x D) |
177
x 482 x 501.6mm (6.97" x 18.98" x 19.75") |
| weight |
11.4kgs
(29.7 lbs) |
| Passive
Backplanes Option |
Support
8/14-slot ISA or PCI/ISA PICMG passive backplane & Baby-AT or ATX
motherboards |
| Power
Supply |
PS/2
Type & ATX Type power supply
Redundant Power Supply |
|
Environmental Specification |
| Operating
Temperature |
0˘XC
~ 50˘XC (32˘XF ~ 122˘XF) |
| Relative
Humidity |
5%
~ 95%, non-condensing |
| Altitude |
10,000ft
(3,000m) |
| Vibration |
1.5G
Max and 0.1" p-p at 5 to 500Hz |
| Shock |
10G
peak acceleration (10m/sec) |
| Safety |
Meets
UL, CSA, and TUV |
| EMI |
FCC
Class A and CE |
|
|
