VTC1304 - 1U Chassis

19" 1U rugged heavy-duty SPCC steel chassis meets the EIA RS-310C
   standard
Removable mounting trays design that supports hot-swappable¹
   SCA-SCSI hard disk for easy data maintenance
Supports any compatible Socket-370 based Extended ATX/ATX/
   MicroATX form factor motherboard sized up to 12" x 13"
Built-in highly efficient standard compact-sized 250W ATX power
   supply with PFC and AC auto sensing that is UL, CSA, TUV and CE
   compliance²
Capable of accommodating one 5.25" slim CD-ROM and one half-height
   3.5" front accessible disk drives and two 1"-height 3.5" hot-swappable
   SCA-SCSI IDE removable disk drives
One power-on/off switch, one reset switch, three LED indicators are
   protected by a detachable, keyless front door panel
Eight high-speed ball bearing cooling fans provide excellent airflow to
   dissipate heat from the chassis and front filter design protects system
   against dust
Supports an optional 1-slot PCI riser card³ for future expansion
Custom rear I/O plate design supports any Intel CA810E/Tyan S2510
   compatible S-370 based ATX/Micro ATX motherboard, plus reserved
   one slot opening for use with optional riser card in the rear of the
   chassis
Dimensions (W x D x H): 19" x 23.6" x 1.73" (482.6 x 620 x 44 mm)

Removable mounting trays design that supports hot-swappable¹
   SCA-SCSI hard disk for easy data maintenance
 

 Supports any compatible Socket-370 based Extended ATX/ATX/
   MicroATX form factor motherboard sized up to 12" x 13"
 

 Built-in highly efficient standard compact-sized 250W ATX power
   supply with PFC and AC auto sensing that is UL, CSA, TUV and CE
   compliance²
 

 Capable of accommodating one 5.25" slim CD-ROM and one half-height
   3.5" front accessible disk drives and two 1"-height 3.5" hot-swappable
   SCA-SCSI IDE removable disk drives
 

 One power-on/off switch, one reset switch, three LED indicators are
   protected by a detachable, keyless front door panel
 

 Eight high-speed ball bearing cooling fans provide excellent airflow to
   dissipate heat from the chassis and front filter design protects system
   against dust
 

 Supports an optional 1-slot PCI riser card³ for future expansion
 

 Custom rear I/O plate design supports any Intel CA810E/Tyan S2510
   compatible S-370 based ATX/Micro ATX motherboard, plus reserved
   one slot opening for use with optional riser card in the rear of the
   chassis
 

 Dimensions (W x D x H): 19" x 23.6" x 1.73" (482.6 x 620 x 44 mm)