|
| |
|
Adtran
Enterprise Network Series
|
 |
DUAL T1/PRI
ATLAS 550 MODULE
|
The Dual T1/PRI module combines with other ATLAS components to implement a
variety of WAN access products, including a T1 Bandwidth Manager, an ISDN
Switch, and a Digital Access Cross-Connect System (DACS). The module provides
two user ports, each of which can be independently configured to operate in T1
(DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes.
The Dual T1/PRI module can perform T1 or PRI conversion, translating between
the robbed-bit signaling presented in a channelized T1 circuit and the D-channel
signaling of a PRI circuit. When using the Dual T1/PRI module, ATLAS operates in
a DACS mode supporting DSO time slot interchange and DSO grooming while
preserving robbed bit signaling. ATLAS can be fully populated with T1/PRI
modules to support a pure DACSing application of 10 FT1 circuits or 4T1s.
The Dual T1/PRI Module can be used to interface with both the public network
and end-user equipment.
Configuration of the T1/PRI module can be accomplished through a variety of
mechanisms, including Telnet or VT100 Emulation. SNMP management is supported
for alarm and event reporting.
Extensive T1 circuit monitoring is standard with the Dual T1/PRI module,
including the ability to detect, store, and report all performance parameters
specified in AT&T Technical Reference 54016. The module detects and reports
alarm conditions associated with the circuit, including Loss of Signal, Red
Alarm, Blue Alarm, Yellow Alarm, and for PRI circuits, D-Channel
Synchronization.
The Dual T1/PRI module responds to standard loopback commands from the
telephone company central office, both in-band commands and those sent through
the Facilities Data Link. In addition, local and remote loopbacks (both line and
payload) can be initiated from ATLAS. When testing the T1 circuit, the Dual
T1/PRI module allows the user to select from a variety of test patterns,
including all 1's, 0's, as well as a standard QRSS pattern. When sending the
QRSS pattern, the Dual T1/PRI module records and reports the results of the
testing to the user.
Features
- Two T1/PRI interfaces
- Built-in CSUs
- Configurable for DS-1, PRI or DSX-1 operation
- Maximum distance 6,000 ft.
- AT&T 54016, 62411 and ANSI T1.403 compliant
- D4 and ESF framing formats
- AMI and B8ZS line coding
- D-Channel to robbed bit signaling conversion
- ESF performance monitoring
- Local and remote loopback support
- Generates and detects QRSS test pattern
- Compliant with Lucent 4ESS/5ESS, Nortel DMS100 and National ISDN
- Lightning protection
- Occupies a single slot in the ATLAS 550 chassis
- Hot swappable
- Standard 5-year warranty
Product Specifications
PHYSICAL INTERFACE
LINE RATE
FRAMING
LINE CODING
LINE LENGTH
- 6,000 feet 24 gauge (DS-1) 655 feet (DSX-1)
DIAGNOSTICS
- Local Loopback-Line and Payload
- Remote Loopback-Line and Payload
TEST PATTERNS
ALARMS
- Loss of Signal, Red, Yellow, Blue, D-Channel
PERFORMANCE MONITORING
- ES, BES, SES, SEFS, LOFC, CSS, UAS, LCV, PCV, LES
SIGNAL MONITORING
LBO
- 0,7.5,15,22.5 dB
- 266,399,533,655 feet
|
|
SYSTEM TIMING
- Network, Internal, External
ROBBED BIT SIGNALING
- E&M Immediate, E&M Wink, Ground Start, Loop Start, Feature
Group D
CONVERSION
- Robbed Bit Signaling to ISDN D-Channel, AMI to B8ZS, D4 to ESF
SWITCH COMPATIBILITY
- PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100, National ISDN
SWITCH EMULATION
- PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100, National ISDN
AGENCY APPROVALS
- FCC Part 15, Class A, UL, and Canadian UL(CUL)
ENVIRONMENT
- Operating: 0° to 45°C (32° to 113°F)
- Storage: -20° to 70°C (-4°to 158°F)
- Relative Humidity: Up to 95%, non-condensing
POWER
PRODUCT INCLUDES
- Two RJ-48 to RJ-48 cables (15 feet)
- One RJ-48 to RJ-48 Crossover cables (15 feet)
- Quick Start Guide
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
Ordering Information
- Dual T1/PRI Module - 1200314L1
 |
Back
to Home |
 E-Mail
|
VoxTechnologies Corp. - Industrial
Computer Leader
Tel: 972-234-4343 Fax: 972-234-4295
Toll-Free: 1-888-568-6224 |
|
Related