|
Performance
Alpine
3808
64 Gbps switch fabric
48 millions pps
Alpine
3804
32 Gbps switch fabric
24 million pps
Prototols
and Standards
IEEE 802.3z 1000BASE-X
IEEE 802.3x Flow control
RFC 1058 RIP
RFC 1723 RIP v2
RFC 2236 IGMP v2
DVMRP v3
PIM-Dense Mode
RFC 2178 OSPF
RFC 1587 OSPF NSSA
RFC 1519 Classless Interdomain Routing (CIDR)
RFC 1122 Host requirements
IEEE 802.1D-1998 (includes 802.1p)
IEEE 802.1Q VLAN tagging
RFC 1256 Router discovery protocol
RFC 1812 IP router requirement
RFC 1771 BGP4
RFC 1965 Confederations
RFC 1997 Communities
RFC 2439 Route Flap Dampening
RFC 783 TFTP
RFC 1542 BootP
RFC 951 BootP
RFC 854 TelnetRFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 2068 HTTP
RFC 2131 BootP/DHCP relay
RFC 1990 MLPPP
RFC 2878 PPP BCP with support for 802.1Q and 802.1D tagging
RFC 1332 PPP IPCP
RFC 1661,1662 PPP
RFC 1332 PPP IPCP
RFC 1990 Multilink PPP
RFC 1994 CHAP
RFC 2878 BCP
Management
and Security
Management
RFC 1157 SNMP v1
RFC 1213 MIB II
RFC 1354 IP forwarding table MIB
RFC 1850 OSPF 2 MIB
RFC 1493 Bridge MIB
RFC 2037 Entity MIB
RFC 1573 Evolution of Interface
RFC 1643 Ethernet MIB
RFC 1757 Four groups of RMON
RFC 2021 RMON probe configuration
RFC 2239 802.3 MAU MIB
RFC 1724 RIP v2 MIB
ExtremeWare Enterprise MIB
HTML and telnet management
RFC 2096 IP Route Table MIB
RFC 2030 Simple Network Time Protocol
RFC 1406 T1 MIB
RFC 1471 PPP LCP
|
Physical
Dimensions
Alpine 3808:
(H) 21 in x (W) 17.32 in x (D) 11.375 in
(H) 53.30 cm x (W) 43.99 cm x (D) 28.90 cm
Weight: Empty: 50 lbs
Fully loaded: 98 lbs
One AC power supply: 14 lbs
One Module: 3 lbs
Alpine 3804:
(H) 10.5 in x (W) 17.32 in x (D) 15.53 in
(H) 26.65 cm x (W) 43.99 cm x (D) 39.42 cm
Weight: Empty: 30 lbs
Fully loaded: 68 lbs
One AC power supply: 14lbs
One Module: 3 lbs
Heat
Dissipation
Power Supply 680 watt Maximum (2325 BTU/hr)
Input Voltage Operations: 100 VAC to 120 VAC and 200 -240 VAC,
autoranging
AC Line Frequency 47 Hz to 63 hz
DC Input: -48VDC, 30 Amp
Current Rating: 100 -120 VAC: 13 A; 200 -240:6.5 A
Safety
UL 1950 3rd Edition, Listed (Safety of ITE)
EN60950:1992/A1-4:1997+ZB/ZC Deviations (Safety of ITE)
IEC 950CB (Safety of ITE)
Low Voltage Directive (LVD)
CSA 22.2#950-95 (Safety of ITE)
AS/NZS 3260 (product safety standard)
EN60825-1 (Safety of Lasers Products)
FCC CFR 21 (Laser Products)
EMI/EMC
NEBS Level III Compliant
FCC CFR 47 part 15 Class A (USA EMC standard)
ICES-003A/C108.8-M1983 Class A (Canada EMC standard)
VCCI Class A (Japan EMC standard)
AS/NZS 3548 (Australia EMC standard)
EN 55022 Class A (European EMC standard)
CISPR 22 Class A (European EMC standard)
EN 50082-1:1997 includes ENV 50204 (European EMC standards)
EN 55024:1998 includes IEC 61000-4-2,3,4,5, 6,8,11 (European EMC
standards)
EN 61000-3-2,3 (European EMC standards)
CNS 13438 Class A (BSMI-Taiwan)
Low Voltage Directive (LVD)
Requirements
Operating Temperature 0º to 40º C
Storage Temperature: -40º to 70º C
Operating Humidity: 10% to 95% relative humidity, non-condensing
EN60068 to Extreme IEC68 schedule
Reliability
Minimum 50000 hrs MTBF to Mil HDBK 217F Notice 1, Parts Stress
Method
|