Notice: You have reached an older version of the Vox Technologies website.

We still carry the products and offer the services on this version of the site, but many features and services are out of date.

To be directed to our new portals, please select from the below:

Engineering & Project Integration
Single Board Computers and related
Programmable Logic Controls (PLC) and related
Industrial Power Supplies

Please do not hesitate to contact us directly at +1-972-234-4343 or (toll free) 1-800-941-0322.

Source for VMEbus, PMC Modules, CompactPCI, Single Board Computers, Rackmount Servers, and Rackmount Chassis

Ordering Form

Unit of Measurement Converter

VoxTechnologies Enterprise Networks

DSU 56/64 & DSU 5600

DDS DSU/CSUs

The ADTRAN DSU 56/64 and DSU 5600 provide cost-effective solutions for termination of 56 or 64 kbps DDS services. The units are a very economical solution for single port point-to-point, multi-point or frame relay applications. Extensive use of VLSI technology provides a highly reliable feature-rich DSU. The enclosure for both the DSU 56/64 and

DSU 5600 is a small, attractive, slim-line package that is wall mountable, rack mountable or can sit on a desktop.

The DSU 56/64 provides both a physical and electrical V.35 DTE interface, which is mounted on the rear panel. The DTE interface operates at the same rate as the network, either 56 or 64 kbps. Also located on the rear panel is a set of option DIP switches along with an RJ-48S network interface. The option switches allow the user to select the Network/DTE data rate, control lead options, remote digital loopback, and scrambler options.

The DSU 5600 provides both a physical and electrical EIA-232 DTE interface, which is mounted on the rear panel. The network interface operates at either 56 or 64 kbps. The DTE interface operates either at 56 or 64 kbps synchronous or 1.2 to 57.6 kbps asynchronous. Also located on the rear panel are option switches along with an RJ-48S network interface. The option switches allow the user to select the rate of operation, control lead options, remote digital loopback, and scrambler options.

Both units respond to standard loopback commands from the service provider. In addition, the units have built-in test capabilities which include V.54 remote loopback, DTE, DTE and loop, DTE with test pattern, and loop only. Included with the remote loopback is the capability to select a 2047 BERT test pattern, with results displayed on the front panel.

The front panel of the DSU 56/64 and DSU 5600 provide a set of eleven LED indicators. Five of the indicators show the status of the V.35 DTE or EIA-232 interface while the remaining LEDs indicate the various test modes and loop status. Two front panel keys allow the user to select one of the several test modes the unit supports.

Features

Provides a cost-effective method for termination of DDS services
DSU 56/64: V.35 DTE interface
DSU 56/64: Synchronous operation at 56 or 64 kbps rates
DSU 5600: EIA-232 DTE interface
DSU 5600: Synchronous 56K or 64K rates Asynchronous rates from 1.2 to 57.6 kbps
Slim-line enclosure is designed for desktop, wall mount, or rackmount in the ADTRAN RM10AC rackmount chassis
Internal power supply
Can be used for point-to-point, multi-point or frame relay applications
Easy to configure; all options set by easily accessible DIP switches
Multiple test and diagnostic features
Standard 5 year warranty

DSU 56/64 & DSU 5600 APPLICATION EXAMPLE

Product Specifications

OPERATING MODES

Dedicated DDS
Point-to-point
Multi-point

NETWORK RATES

56/64 kbps

INDICATORS

Status

RS, CS, TD, RD, CD, & ALM

Test

DTE, LOOP, RDL, PTRN, & ERROR

OPTIONS

Set by DIP switch
Loop Rate: 56 or 64 kbps
CTS - On or Normal
CTS DELAY: Short or Long (DSU 56/64)
CD: On or Normal
DSR: On or Normal
Scrambler: On or Off
Anti-Stream: On or Off (DSU 56/64)
RDL: Enable or Disable

DTE RATES

DSU 56/64: V.35 physical and electrical
DSU 5600: EIA-232 physical and electrical

DIAGNOSTICS

Local

DTE, DTE/Loop, DTE with test pattern, Loop only, test pattern

Remote

V.54 with or without 2047 test pattern

LINE REQUIREMENTS

Loop transmission parameters as defined in: AT&T PUB 62310: Dedicated DDS

LINE INTERFACE

RJ48S

RECEIVER SENSITIVITY

45 dB at all rates

AGENCY APPROVALS

FCC Part 15 Class A
FCC Part 68
UL and CUL
Industry Canada CS03

ENVIRONMENT

Operating: 0° to 50°C (32° to 122°F)
Storage: 20° to 70°C (4° to 158°F)
Humidity: Up to 95% non-condensing

PHYSICAL

Dimensions: 1.625" H, 6.50" W, 8.25" D
Weight: 1.5 lbs
Power: 115 VAC, 60 Hz, 2 W

Products include: 8-pin to 8-pin modular cable & user manual

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Ordering Information

DSU 56/64 - 1200062L1
DSU 5600 - 1200078L1

Download this brochure in pdf format.
Request more information.

$csu, dsu, dacs, bandwidth manager, frame relay, remote access, pri, channel bank, bri, adtran, enterprise, fxs, fxo, t1, e1, tsu, isdn, pbx, atm, clec, plesiochronous, point-to-point, fractional, voice, data, e&m, analog, router, pstn, v.35, dsx, fsx, dbu, ethernet, network management, osu, multiport, multi-mode fiber, snmp, t3su, dacsing, ds0, ds1, ds3, drop/insert, hssi, u-interface, hdsl, imux, mux, multiplexers, cross-connect, bonding, dte, hdlc, pots, chassis, psu, rcu, eia232, ground start, foreign exchange, dpo, plar, rackmount, wallmount, tdu, ft1, t1/ft1, did, 2-wire, rj-11, spanning tree, bridging, 4-wire, eia-530, rst-232, fiber, t3, esu, dial back, sdlc, ip routing, sna/sdlc, bisync, slip,async, tbop, safe-t-net, dce, h0, h11, in-band, facilities data link, fdl, pro, sdlc-llc2, ppp, v.34, sw56, xdsl, 10baseT, vt100, ccitt/v120, ip/ipx, mlppp, remote loopback, local loopback, multilinks, aggregating, aggregate, dtr assertion, rs-366, y cable, spid, lzs compression, v.120, video conferencing, termination units, redundant power supply, g.shdsl, sonet networks, mlt, ringdown, pcm, tr-08$

Back to Home

VoxTechnologies Corp. - Industrial Computer Leader
Tel: 972-234-4343 Fax: 972-234-4295 Toll-Free: 1-888-568-6224