ICP Electronics
ITouch Partner
Lucent Partner
Marconi Partner
Nortel Partner
RAD Partner
Telco Partner
Tellabs Partner
VoxTechnologies 3Com Partner
Adtran Partner
Alcatel Partner
CA Partner
ChannelBank
Cisco Systems Partner
Eastern Partner
Enterasys Partner
Extreme Partner
Larscom Partner Kentrox Partner

• With the PCI RAID controller board (based on PCI bus) and the hot-swappable HDD kit. It is easy for you to have a cheap but powerful solution for recoverable storage. (Only NT based solution is available now!)

• We adopt the notebook type CD-ROM and FDD to overcome the problem of space limitation. Because the notebook devices are designed for rugged operation, it will have better reliability when applied to rack-mount application.

• We designed the optional system monitoring panel to add intelligence into the system. You can use our PISM-2000 (a specially designed system monitoring board) to control the system and even have a better S/W control for the system management.

• Though minimal changes are required on the ventilation system, we still take into account on the temperature problem. With its new design, it reduces heat tremendously via the high quality and reliable fans that expires heat from the system.

ACTI-6000 is the most cost effective CTI server to meet the various demands of today's market. It is equipped with a 330W power output PSU, an optional 14-slot PICMG backplane (ATX type mother board is also acceptable), the most compact PCI RAID solution (the controller is in a PCI based board and 3 HDDs are put in a well-designed kits) and a notebook type CD-ROM and FDD to form the most compact and powerful system for CTI application.

You can choose the most suitable ACTI SBC series that work well with ACTI-6000 and its high integrity and performance will bring you the most effective result.

• Rack-mount design to meet the EIA RS-310C standard which is easy to fit in any cabinet from different venders

• Adopt modularized function panel for installation of multiple systems and redundant PSUs

• Power switch protection offered inside the panel cover to prevent accidental reset or system shut-down

• Adopt 330W PS/2 power supply to deliver sufficient power to the whole system

• Two adjustable positions of card retainer allow fitting of multiple types of cards

• Two 12cm ball-bearing fans provide better ventilation to the system

• PCI RAID solution with CD-ROM & FDD forms the best auxiliary storage for real time data protection

• Modularized back panel for easy change of systems from ATX M/B to PICMG backplane

• Compatible with standard Dialogic voice/fax modem card

• Changeable modularized back panel for 14-slot PICMG BP and ATX type M/B

Construction
Heavy duty steel with aluminum front panel
Cooling Fan
Two 12cm (86.5cfm) hot-swappable ball bearing fans
Back Panel
Replaceable modules for 14-slot BP, baby-AT, ATX M/B
Dimension
- 483(W)x450(D)x177(H) mm
- 19"(W)x17.7"(D)x7"(H)
Weight
- Net: 29Kg / 63.9Lb (without HDD)
- Gross: 31Kg / 68.3Lb (without HDD)
Color
Black
Operating Temperature Range
0 to +55°C, 20- 90%RH
Storage Temperature Range
0 to +70°C, 5- 95%RH
Vibration
- 5-15Hz, 0.25G p-p
- 15-500Hz, 2.5G p-p

ACTI-6000-14P4
19" 4U Height Advanced CTI Server
- 14-slot ACTI-14P4 backplane
- 330W AT type PS/2 PSU
- PCI type RAID control card with 3 compact IDE drives
- Built-in notebook type CD-ROM and FDD

ACTI-6000-14AA
19" 4U Height Advanced CTI Server
- 14-slot ACTI-14AA active backplane
- 330W AT type PS/2 PSU
- PCI type RAID control card with 3 compact IDE drives
- Built-in notebook type CD-ROM and FDD

ACTI-6000-300MX
- ATX M/B type ACTI-6000 equipped with a 330W ATX PSU