1.2GB/s Bandwidth Multi-threaded IO Link
SiS635T provides one solution to resolve the lack of IO bandwidth for the previous PC platform with PCI bus bandwidth only up to 133MB/s. SiS635T applies the multithreaded architecture - "Build-in Multi-threaded IO Link" to provide enough IO bandwidth up to 1.2GB/s and increase the hardware parallelism. It will increase efficiently the system total throughput and performance, especially for multi-tasking environment.

• CPU : Single Socket-370 66/100/133MHz FSB CPU up to Intel P3 Tualatin 1.26GHz CPU
• ^BIOS : Award PnP BIOS
• System Chipset : SiS635T chipsets
• System Memory : 2 x DIMM (168-pin) for SDR Memory module max. 1GB SDRAM memory size
• Display :
  • SiS315 wtih 32MB SDRAM, DB-15 for CRT
  • AGP interface : AGP 4X, 266MHz, 1GByte data bandwidth
  • Built-in 256Bit 3D engine up to 2048 texture size
  • Built-in MPEG 1/2 Video Decoder for VCD/DVD and HDTV decoding
• Ethernet : 2 x 10/100Mbps Ethernet with RJ-45 (SiS 635T build-in & Intel 82559)
• SSD : 1 x CompactFlash Type II Socket support Flash Disk or IBM Micro Divers (option)
• Audio :
  • 1 x PCI hardware sound (C-Media 8738) on board
  • 1 x Line-in, 1 x Line-out, 1 x Sub-out, 1 x Micro-in, 1 x CD-in
• I/O :
  • 2 x RS-232 serial port
  • 1 x parallel port (SPP/EPP/ECP)
  • 2 x USB 1.1 (Pin header)
  • 1 x channel support 2 x 3.5" FDD, support 1.44MB, 2.88MB and 3 mode function
  • 2 x ATA-100 channel support HDD, CD-ROM, LS-120, and ZIP.
  • 1 x PS/2 controller
• Hardware monitoring
• ATX power control function
• WDT : software programmable, support 1 ~ 255 sec. system reset
• ISAPlus^™ : Designed to enhance the ISA bus drive capability
• Power connector : 1 x ATX 20-pin connector
• Interface : PICMG 338 x 122mm (13.3" x 4.8")
• Operating Temp : 0~55^oC (CPU need cooler)
• Relative Humidity : 5~95%, non-condensing
• GW : 900g

CMI-8738 5.1 channel Hardware Sound chip
Being compatible with A3D^™ and DirectSound^™ 3D, CMI8738 meets PC99^® requirements. CMI8738 uses HRTF 3D extension technology to enhance traditional HRTF 3D positional audio by substituting two-speaker system by four or six - speaker one (it supports additional 2 ch 16-bit DAC to provide rear side audio and another 2 ch for subwoofer/Center). It greatly improves HRTF 3D positional gaming effects, and don't have to worry about the environmental confinement any more.