Supports Slot-1 base Celeron^TM / Pentium^® III up to 100MHz FSB

Intel^® 440BX chipset

Three 168-pin DIMM sockets up to 768MB SDRAM

Adaptec AIC-7890 Ultra2 SCSI chip on board

S3 AGP bus VGA chip on board with 4MB/8MB video memory

CPU : Slot-1 base support Celeron^TM / Pentium^® III up to 100MHz FSB

System Memory : Three 168-pin DIMM sockets up to 768MB SDRAM

System Chipset : Intel^® 440BX chipset

BIOS : AMI PnP Flash BIOS

Video Controller :
--> S3 Trio3D
--> Bus : AGP 2X
--> V-RAM : 4MB/8MB
--> Resolution : 1600 x 1200 ( 64K colors )
--> Connector : DB-15 for CRT display

SCSI Controller :
--> Chip : Adaptec AIC-7890
--> Interface : 1 x Ultra2 SCSI ( 16-bit 80MB/Sec.; 68-pin connector )
                    1 x UltraWide SCSI ( 16-bit 40MB/Sec.; 68-pin connector )
                    1 x SCSI2 ( 8-bit 20MB/Sec.; 50-pin conector )
--> Drivers : Microsoft Windows NT, Windows 2000, Windows 95/98, Novell NetWare, SCO Openserver, SCO UnixWare, IBM OS/2 and Linux

Super I/O :
--> 2 x RS-232 ports
--> 1 x parallel port ( support SPP/EPP/ECP mode )
--> IrDA port

USB ports : Two ports by pin-header, meets USB ver.1 standard

IDE : Dual Ultra DMA33 interface with tow 40-pin pin-header

FDD : One port

Watchdog Timer

LM78 hardware monitoring chip on board 

SSD : One DiskOnChip^TM socket

ISAPLUS^TM : Designed to enhance the ISA bus drive capability

E²Key^TM : A non-volatile 1Kbit EEPROM is provided to retain application critical read/write data

Supports ATX power control function

Power Consumption : 
8A@+5V, 240mA@+12V, 40mA@-12V ( Pentium^® II 400MHz CPU and 32MB EDO RAM )

Operating Temperature : 0^o ~ 55^oC ( CPU needs cooler )

Relative humidity : 5 ~ 95%, non-condensing