ROBO-2410, Compact NS Geode GX1 SOM-144 (System on Module) Processor Module

CPU

• Onboard NS Geode GX1 300MHz (available in different speeds by special order), BGA package

Chipset

• NS Geode CS5530A

Memory

• Onboard one 144-pin SODIMM socket supports up to 256Mbytes SDRAM

BIOS

• Award 256KB BIOS

I/O Chipset

• Winbond W83977F-A

Enhanced IDE

• Supports two IDE devices. Supports Ultra DMA/33 mode with data transfer rate up to 33MB/sec.

FDD Interface

• Supports up to two floppy disk drives, 5.25" (360KB and 1.2MB) and/or 3.5" (720KB, 1.44MB, and 2.88MB)

Parallel Port

• Supports SPP, ECP, and EPP modes

Serial Port

• Supports two 16C550 equivalent serial ports (TTL only). Ports can be configured as COM1, COM2, COM3, COM4, or disabled individually. 

IR Interface

• Support one IrDA Tx/Rx header

KB/Mouse Connector

• Supports PS/2 keyboard and mouse

USB Connector

• Supports two independent USB interfaces (OpenHCI, Rev. 1.0 specification compliant)

Watchdog Timer

• Can generate a system reset. Software selectable time-out interval (16 sec. ~ 127 min., 30 sec/step)

Power Management

• I/O peripheral devices support power saving and doze/standby/suspend modes

• APM 1.2 compliant

Power Requirement

• +5V (4.75V to 5.25V) , 5V @ 2A w/ GX1 300MHz

Board Dimension

• 68mm x 100mm (2.5" FDD-size) 

Operating Temperature

• 0 to 60°C

Additional Functionality

Flat Panel/CRT Interface
Chipset

• NS Geode CS5530A 

Display Memory

• Shared display memory up to 4MB 

Display Type

• Supports non-interlaced CRT and up to 18-bit TFT LCD displays 

Interface

• 2x AGP, accelerator graphics ports 1.0 compliant

Display Mode

• LCD panel supports up to 1280x1024 @ 8bpp, 1024x768 @16bpp

• CRT displays support up to 1280x1024 @ 8bpp, 1024x768 @16bpp

Audio Interface
Chipset

• NS Geode CS5530A

Audio Controller

• Supports AC97 specification Revision 1.3, 2.0, and 2.1 compliant interface

• NS Geode GX1 System on Module 144 Processor Module for Application Platform.