|
Home
Up
Search
Industrial Products
ACTI648
ROBO698
ROBO679
ROBO678
ROBO658
NC6060
ROBO638
ROBO608
ROBO616
ROBO605
| |
| ROBO638 |
Full Function SBC with
Ultra 2 SCSI/AGP VGA/Ethernet, Based on the Pentium® III
Processor
 |
|
|
 |
| |
-
Slot-1 SBC w/ 1G SDRAM
-
Intel 82440 BX chipset
-
On-board Adaptec-7890 U2 SCSI
-
On-board ATI Rage Pro VGA
-
On-board Intel 82558 Ethernet
|
|
| |
|
|
|
-
Support Intel® Pentium® III processors for
the SC242 up to 850MHz
-
Intel® 440BX AGPset supports up to 1GB of SDRAM with
100MHz memory bus and ECC function
-
Flush mounted Slot 1 CPU architecture makes the board more rugged
and reliable
-
On-board ATI Rage Pro AGP VGA display with 4MB/8MB VRAM
-
On-board Intel® 82558 10/100 Base-T Ethernet
-
Adaptec 7890 Ultra 2 SCSI, the fastest disk I/O for 80MB/S
-
PC '98, PICMG 2.0 and PCI V2.1 industrial standard compliant
-
One DOC socket for booting Windows NT directly
-
256KB/512KB SDRAM built-in L2 cache inside the embedded module
with a Pentium III processor
-
DS1687 RTC for real Y2K compliance
-
Support system monitoring & protection and ATX power control
|
 |
|
|
|
|
|
General
CPU
-
Support Intel Pentium III processors
up to 850MHz
Chipset
-
Intel 82440BX AGPset with MMX
technology and optimized SDRAM
Memory
-
Four 168-pin DIMM sockets support up
to 1GB of SDRAM with ECC function
BIOS
-
AMI system BIOS (256KB flash ROM)
On-Board I/O
-
On-board Winbond W83977ATF super I/O
with two USB ports and one IrDA infrared port
Watchdog Timer
-
Eight segment
(0.5, 1, 2, 4, 8, 16, 32, 64 seconds) hardware time-out intervals
-
255 intervals from 0.5 min to 254.5
min by software programming
Power Requirement
-
+5V@9A (typ.), +12V@100mA, -12V@30mA
Board Dimension
-
339.5(L) x 122(W)
mm
-
13.37"(L) x 4.8"(W)
-
8-layer PCB
Operating Temperature
Storage Temperature
Relative Humidity
-
5% to 95%, non-condensing
Connector
-
Support Mini DIN, 5-pin header & PS/2
type keyboard connector
Additional Functionality
On-board AGP VGA Display
-
On-board ATI Rage Pro graphics
accelerator supports industry leading 3D and top grade 2D display
performance/quality
On-Board 10/100 Base-T Ethernet
-
Intel 82558 Ethernet chip supports
10/100 Base-T connecting capability
On-Board Ultra 2 SCSI
-
Adaptec AIC 7890A
SCSI controller supports Ultra 2 SCSI transfer rate up to 80MB/s
-
15 devices connectivity
-
Drivers supported: DOS, Windows 95,
Windows NT, Novell Netware, SCO Unix, OS/2 Warp 3.0, ... etc
System Hardware Monitoring (LM79)
-
Monitor CPU & chassis fan status,
system temperature and DC voltage
DiskOnChip Flash Disk
-
Support M-Systems' flash disk up to
288MB
Fully ATX Power Control
-
Modem-Ring-On and Wake-On-LAN
|
* Specifications are
subject to change without notice.
* Pentium III and Celeron are registered trademarks of Intel
Corporation.
* Other trademarks, logos, brands and company names are the property
of their respective owners. |
|
|
|
|
|
|
ROBO638
-
Full function PCI/ISA AIO SBC, based
on the Pentium III processor
ROBO638Z
-
ROBO638 without SCSI function
|
|
|
|
|
|
