|
| |
| PPAP100W |
The Best
Cost-performance Rated Communication Appliance System Board
 |
|
|
 |
| |
-
Eight GPIO LEDs
-
Support DOC and compact flash
-
Dedicated BIOS
-
Hardware monitoring
-
Watchdog timer
-
Linux of different flavors support
|
|
| |
|
|
|
|
PPAP100W is a dedicated
computing board for communication appliance applications. It can be
used for entry level desk-top product. Various power inputs are
incorporated to satisfy both desk-top and rack-mount requirements.
Market segment of this product includes |
security, network
attached storage, web cashing, load balancing, all-in-one devices
and VoIP. Applications have been considered since the very
beginning; therefore, PPAP100W should be the best choice of
computing board for communication appliance. |
 |
|
|
|
|
-
Flexible processor support ranging from the Intel®
Celeron® processor 566MHz to the Pentium III 866MHz
-
Eight GPIO LEDs for customized indication
-
Support DOC (32-pin socket) and compact flash
-
Dedicated BIOS for the operation via SIO port
-
On-board hardware monitoring and built-in watchdog Timer
-
Linux of different flavors support
-
Watch-dog timer incorporated to prevent software lockup
-
ATX and AT type operation can be selected by jumper setting
|
|
|
|
|
|
|
|
General
CPU
-
Support Intel® Socket 370
Pentium® III processor up to 850MHz and Celeron®
up to 700MHz
Chipset
Memory
-
One 144-pin SODIMM socket up to 128MB
memory size
L2 Cache Memory
-
128KB/256KB PBSRAM built in (Celeron®/Pentium®
III processor) CPU module
BIOS
-
Award system BIOS with 256KB Flash
ROM to support DMI, PnP and Green function
Expansion Support
-
One PCI edge connector for expansion
PCI IDE Interface
-
One on-board
DMA33 IDE channel to support two IDE devices
-
Default support 2.5" IDE devices
(3.5" IDE requires a converting cable)
On-Board I/O
-
Two USB and two SIO ports
Serial Ports
-
Support two
high-speed 16C550 compatible UARTs with 16-byte T/R FIFOs
-
Support optional LCD/Key pad module
USB Interface
-
Support two USB ports for high speed
I/O peripheral devices
Auxiliary I/O Interfaces
-
System reset switch, Power LED, LAN
activity LED, Power On/Off button and HDD LED interface
Application LEDs
-
Eight application definable LEDs
Watchdog Timer
-
5, 1, 2, 4, 8, 16, 32, 64 sec.
time-out intervals by jumper setting or 255 intervals from 0.5
min. to 254.5 min. by software programming
Power Inlet
-
Support one standard 20-pin ATX power
connector with power button pin
PCI Golden Finger
-
One PCI golden finger edge connector
for PCI connection
DiskOnChip
-
Reserved one 32-pin socket for
M-systems' flash disk up to 288MB
Hardware Monitor
Support on-board hardware monitor for
Power Requirement
Power Good
-
On-board power good generator with
reset time, 300ms ~ 500ms
Physical and Environmental Requirements
-
Outline
Dimension: 129.3(W) x 203(L) mm
-
Operating Temperature: 5 to 45ºC (41
to 113ºF), 20-90%RH
-
Storage Temperature: 5 to 70ºC,
5-95%RH
-
Relative Humidity: 5% to 95%,
non-condensing
|
|
* Specifications are
subject to change without notice.
* Pentium III and Celeron are registered
trademarks of Intel Corporation.
* Other trademarks, logos, brand names and company names are the
property of their respective owners. |
|
|
|
|
|
|
Faster Time-to-market
-
Customer can port/develop their
software to/on our ready-to-ship solution to minimize
time-to-market
Better Products Scalability
-
Customer can select from our wide
range of solutions to scale their products
Leading Edge Hardware Innovation
-
Customer can always enjoy the most
leading edge product from Portwell
More Focus on Value-added Software Development
-
Independent software venders can
focus on their value-added software without worrying the hardware
platform development
Reduced Inventory and Manufacturing Costs
-
Independent software venders can team
up with Portwell to provide solutions to system integrators or
end-users
|
|
|
|
|
|
|
PPAP100W
-
The best cost-performance
communication appliance system board without Ethernet
|
|
|
|
|
|
