|
Home Up Search Industrial Products
PEAK715VL2(G) PEAK715VL2 PEAK712VL2(G) PEAK712VL2 PEAK710VL PEAK639VL2 PEAK603P PEAK6720VL PEAK6620VL2 PEAK6422V PEAK6320A PEAK670VL PEAK660VL2 PEAK650VL2 PEAK650A PEAK637 PEAK635A PEAK632A PEAK570A PEAK530 PEAK603VL PEAK602VL PEAK600VL PEAK550 EBKSCSI160D EBKSCSI2 EBKSCSI EBK100L4 NEX90SB NEX CARE Quick Reference
| |

System Architecture
- Full size SBC with patented 64/32-bit PCI/ISA Golden finger
- Intel® Socket 370 Pentium® III / Next Generation Pentium® III
with 100/133MHz FSB
- PCI V2.2 compliant
- PICMG 1.0 (Rev.2.0) compliant
CPU Support
- Intel® Pentium® III / Next Generation Pentium® III CPU with
cache on die 256/512K
- Socket 370 FC-PGA CPU running at 100/133MHz FSB up to 1.26 GHz+
- Support streaming SIMD instruction
Main Memory
- Support SDRAM up to 4 GB (Max.) registered SDRAM only
- DIMM x 4
- Memory ECC & scrubbing support
BIOS
- Award® System BIOS
- Plug & Play support
- Advanced Power Management support
- Advanced configuration & Power Interface support
- 4M bits flash ROM
Chip Set
- ServerWorks LC-T
- 100/133MHz FSB support
- PCI V2.2 compliant
On Board VGA
- SMI 712 with 4MB memory on die; 200MHz 24-bit RAMDAC, High
performance, power managed 3D/2D
- PCI 2.1 support
- Driver support: Windows® 95/98/2000, Windows® NT4.0, Linux,
Solaris, SCO
- 15 pin CRT connector x 1; 40 pin and 26 pin TTL Panel Interface
Connector support Dual LCD Display
On Board LAN
- Intel® 82559 Ethernet controller
- 10 Base T/100 Base TX support, full duplex
- Compliant with PCI V2.1, IEEE802.3, IEEE 802.3U
- Backward compatible with former 82558 Ethernet controller base net
modules
- Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows®
NT, Netware, SCO Open Server 5.0, Linux
- RJ45 connector x1
On Board I/O
- SIO x 2, with 2 x 16C550 UARTs, 10 pin header x 1, D-Sub x 1
- PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1
- Floppy Disk controller: 34 pin connector x 1
- On chip enhanced IDE x 2, Ultra DMA33 support, 40 pin connector x
2
- External Keyboard 5 pin connector x 1; 6 pin mini DIN connector x
1, for PS/2 keyboard/mouse
- On board USB port x 2
- On Board buzzer x 1
- On board 2 pin header for I2C; GPIO (4 in 4 out)
- On board 5 pin header for IrDA
- On Board 2 pin header for reset SW, 5 pin for keylock, 2 pin
header for power push button, 3 Pin Jst ( 5Vsb, PS-On, GND ) to
Backplane
- Power Connector (AUX Spec) x 1
ON Board IDE RAID ( Option )
- PROMISE IDE RAID 0, 1, 0+1, FastTrak 100 Chipset
- Boosts Ultra ATA/100 Drives
- RAID 0 performance speeds A/V editing, graphics, imaging, and CAD
- RAID 1 redundancy for entry-level networks, critical data
environments
- RAID 0+1 for high performance, high capacity with fault tolerance
- 40 pin connector ( 2 x shared )
On Board proprietary PCI
interface
- Reserved 32 bit PCI interface for EBK module
On Board RTC
- High precision real time clock/calendar
System Monitor
- Winbond W83782D system monitor controller
- 6 voltages (For +3.3V, +5V, +12V, -12V, Vtt and Vcore x1)
- Fan speed (For CPU)
- 2 temperatures
- Drivers support: Windows® 95/98/2000, Windows® NT4.0
ISAMAX Support
- Maximize ISA signals to support ISA cards up to 20
Watchdog Timer
- 1~64 seconds time-out intervals
Dimensions
Power Requirements
- +5V: 20A (Max.)
- +12V: 400mA (Max.)
- -12V: 50mA (Max.)
- +3.3V: TBD
Environments
- Operating temperatures: 0°C to 60°C
- Storage temperatures: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
Certification

PEAK670VL
-
- Full-size 64bit PCI 133MHz FSB Socket 370
Pentium® III / Next Generation Pentium® III CPU Card with
VGA / LAN
PEAK670VLR
-
- Full-size 64bit PCI 133MHz FSB Socket 370
Pentium® III / Next Generation Pentium® III IDE RAID CPU
Card with IDE RAID 0, 1.0+1 / VGA / LAN
|
|
|