|
Home Up Search Industrial Products
PEAK715VL2(G) PEAK715VL2 PEAK712VL2(G) PEAK712VL2 PEAK710VL PEAK639VL2 PEAK603P PEAK6720VL PEAK6620VL2 PEAK6422V PEAK6320A PEAK670VL PEAK660VL2 PEAK650VL2 PEAK650A PEAK637 PEAK635A PEAK632A PEAK570A PEAK530 PEAK603VL PEAK602VL PEAK600VL PEAK550 EBKSCSI160D EBKSCSI2 EBKSCSI EBK100L4 NEX90SB NEX CARE Quick Reference
| |
 |

 |
100/133MHz FSB, CPU up to 1 GHz |
 |
Max. 3GB SDRAM DRAM, DDR x 3 |
 |
VIA Apollo PRO 266 Chipset |
 |
C&T 69030 VGA |
 |
Dual Intel® 82559 Ethernet |
|
|
|
|

System Architecture
- Full size SBC with PCI/ISA Golden finger
- Intel® Socket 370 Pentium® III with 100/133MHz FSB
- PCI V2.2 compliant
- PICMG 1.0 (Rev.2.0) compliant
CPU Support
- Intel® Pentium® III CPU with 128/256K cache on die
- Socket 370 FC-PGA CPU running at 100/133MHz FSB up to 1GHz+
- Support streaming SIMD instruction
- On board intelligent switching type power regulator
Main Memory
- Support DDR up to 3GB (Max.)
- DDR Socket x 3
- ECC support (single bit error correction/Multiple bit errors
reporting)
BIOS
- Award® System BIOS
- Plug & Play support
- Advanced Power Management support
- Advanced configuration & Power Interface support
- 2M bits flash ROM
Chip Set
- VIA Apollo PRO 266 Chipset (VT8633 and VT8233)
- 100/133MHz FSB support
- PCI V2.2 compliant
- DEC 21150 PCI Bridge
On Board VGA
- C&T 69000/69030 VGA controller
- 2/4 MB SDRAM on die
- Driver support: Windows® 95/98/2000, Windows® NT4.0
- 15 pin CRT connector x 1
On Board LAN
- Dual Intel® 82559 Ethernet controller
- 10 Base T/100 Base TX support, full duplex
- Compliant with PCI V2.1, IEEE802.3, IEEE 802.3U
- Backward compatible with former 82558 Ethernet controller base net
modules
- Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows®
NT, Netware, SCO Open Server 5.0
- RJ45 connector x 2
On Board I/O
- SMsC LPC 47B 272 super I/O
- SIO x 2, with 2x16C550 UARTs, 10 pin header 2.0 pitch x 2
- PIO x 1, bi-directional, EPP/ECP support, 26 pin connector 2.0
pitch x 1
- Floppy Disk controller: 34 pin connector x 1
- On chip enhanced IDE x 2, Ultra DMA/66/100 support, 40 pin
connector x 2, total 4 E.IDE devices support. Two pin power
connector for DOM
- On chip Keyboard, mouse controller, 5 pin connector x 1 (for other
keyboard); 6 pin mini DIN connector x 1, for PS/2 keyboard/mouse
- On board USB port x 2
- On Board buzzer x 1
- On board 2 pin header for I2C
- GPIO (4 in 4 out)
- On board 5 pin header for IrDA
- On Board 2 pin header for reset SW, 4 pin for speaker, 5 pin for
keylock, 2 pin power SW
- On board buzzer x 1
- Power Connector (4P) x 1
On Board RTC
- High precision real time clock/calendar with battery back up
System Monitor
- Winbond W83782D system monitor controller
- Seven voltage (For +3.3V, +5V, +12V, -12V, Vtt and Vcore x 2)
- Two Fan speed (For CPU)
- Three temperature
- Drivers support: Windows® 95/98/2000, Windows® NT4.0
ISAMAX Support
- Maximize ISA signals to support ISA cards up to 20
Watchdog Timer
- 1,2,4...64...512 seconds time-out intervals
Dimensions
Power Requirements
- +5V: 20A (Max.)
- +12V: 400mA (Max.)
- -12V: 50mA (Max.)
- +3.3V: TBD
Environments
- Operating temperatures: 0°C to 60°C
- Storage temperatures: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
Certification

PEAK660VL2
-
- Full-size Socket 370 Pentium® III FSB
133MHZ UltraDMA 33/66/100 CPU Card with VGA / Dual LAN
|
|
|