• Half size SBC with ISA Golden finger
• Intel® Socket 370 Celeron™/Pentium® III with 66/100/133MHz FSB

CPU Support

• Intel® Brand New Socket 370 FC-PGA Celeron™ / Pentium® III CPU with 128/256K cache on die, Processor Max. speed up to 1GHZ+ by running at 66/100/133MHz FSB
• Support streaming SIMD instruction

Main Memory

• Support SDRAM up to 256MB (Max.)
• 168 pin DIMM socket x 1
• Support 100/133MHz SDRAM interface

BIOS

• Award® System BIOS
• Plug & Play support
• Advanced Power Management support
• Advanced Configuration & Power Interface support
• Jumperless for CPU FSB
• 4M bits flash ROM

Chip Set

• Intel® 815E chipsets

   

  82815 x 1 Graphics and Memory Controller Hub (GMCH)

  82801 x 1 I/O Controller Hub (ICH2)

  82802 x 1 Firmware Hub (FWH)

On Board VGA

• Intel® 82815 (GMCH) chipset integrated with Graphics controller
• Hardware motion compensation assist for software MPEG/DVD decode
• 15 pin CRT connector x 1
• Driver support: Windows 95/98/2000, Windows NT 4.0, Linux

On Board LAN

• Signal Channel Ethernet support
• Intel® 82801 (ICH2) chipset integrated LAN controller
• Intel® 82562EM (PLC) Platform LAN Connect
• Support Remote monitoring (alerting)
• 10 Base T and 100 Base TX support, full duplex
• Compliant with PCI V2.1, IEEE802.3, IEEE 802.3U
• Intel® SingleDriver™ technology (10/100Mbps support), that are certified and validated support for most common operating systems
• Drivers support: DOS/Windows, Windows 95/98/2000, Windows NT, Netware, SCO Open Server 5.0
• RJ45 connector x 1

On Board NEXCOM proprietary PCI interface

• Reserved 32bit PCI interface for EBKSCSI2 / EBKSCSI 160D module

On Board I/O

• Winbond 83627 HF Enhanced Super I/O on board
• SIO x 2, with 2x16C550 UARTs, 10 pin header x 1, 9 pin COM Port x 1
• PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1
• Floppy Disk controller : 5.25" 360KB/1.2MB, 3.5" 720KB/1.2MB/1.44MB/2.88MB support, 34 pin connector x 1
• On chip enhanced IDE x 1, PIO up to mode 4, DMA master up to mode 2, Ultra DMA/66/100 support, 40 pin connector x 1, total 2 E.IDE devices support
• On chip Keyboard, mouse controller, 5 pin connector x 1(for other keyboard); 6 pin mini DIN connector x 1, for PS/2 keyboard/mouse
• On board USB port x 2 (6pin header x 1)
• On Board buzzer x 1
• On board 2 pin header for I²C
• On board 5 pin header for IrDA
• On Board 2 pin header for reset SW, 4 pin for speaker, 5 pin for keylock, 2 pin power SW
• One 3 pins power header for 3 pins Power Cable connect to Backplane Board to support ATX Power On function.
• On Board 6 Pin AT Power Input

ACPI Function

• Soft Power off
• Wake On LAN
• Wake On Keyboard
• Wake On Ring
• RTC alarm wake up

DOM ( Disk On Module ) Support

• Power header beside IDE connector to support DOM

System Monitor

• Derived from Super IO Winbond 83627 to support system monitor
• 7 voltage (For +3.3V, +5V, -5V , +12V, -12V, Vcore and Vtt)
• One Fan speed (For CPU)
• Two temperature
• Drivers support : Windows® 95/98/2000, Windows® NT4.0

Bracket Connector

• PS/2 connector x1 (for Keyboard/Mouse)
• RJ45 connector x2 (for LAN)
• 15 pin D-type connector x1 (for VGA)
• COM Port x 1 (for Serial Port)

ISAMAX Support

• Maximize ISA signals to support ISA cards up to 20

Watchdog Timer

• 1, 2, 4... 64 seconds time-out intervals

Dimensions

• 185 x 122 mm

Power Requirements

• TBD for ( Max. Typical )

Environments

• Operating temperatures: 0°C to 60°C
• Storage temperatures: -20°C to 80°C
• Relative humidity: 10% to 90% (Non-condensing)

Certification

• CE approval
• FCC Class A

PEAK602VL   Half-size Socket 370 Celeron™/Pentium® III CPU card w/VGA/LAN PEAK602A   PEAK602VL + EBKSCSI 2 PEAK602AD   PEAK602VL + EBKSCSI 160D

Top