|
Home Up Search Industrial Products
PEAK715VL2(G) PEAK715VL2 PEAK712VL2(G) PEAK712VL2 PEAK710VL PEAK639VL2 PEAK603P PEAK6720VL PEAK6620VL2 PEAK6422V PEAK6320A PEAK670VL PEAK660VL2 PEAK650VL2 PEAK650A PEAK637 PEAK635A PEAK632A PEAK570A PEAK530 PEAK603VL PEAK602VL PEAK600VL PEAK550 EBKSCSI160D EBKSCSI2 EBKSCSI EBK100L4 NEX90SB NEX CARE Quick Reference
| | PEAK715VL2G, Full-size Socket 478 Intel® Pentium® 4 processor CPU Card w/VGA/Dual LAN (Intel® 82551QM 10/100 ethernet controller x1 and Intel® 82540EM ethernet controller x1)

System
Architecture
- Full size SBC
with PCI/ISA Golden finger
- AGP 2.0 compliant
- PCI V2.2
compliant
- PICMG 1.0
(Rev.2.0) compliant
CPU
Support
- Intel® Pentium® 4 processor with 256K/512K L2 cache on die
- Support 400/533MHz system bus, CPU speed up to 2.4GHz or above
Main
Memory
- DDR DIMM x2
support max. memory size up to 2GB (DDR200/266)
- Support
single-sided/Double-sided (Does not support double-sided x16 DDR DIMMs)
- Support
unbuffered non-ECC DIMMs only
BIOS
- Award System BIOS
- Plug & Play
support
- Advanced power
management support
- ACPI 1.0b
compliant
- 4M bits flash ROM
Chipsets
- Intel® 845G (GMCH)
chipsets
- Pin compatible
with future Intel® 845GV/GE chipsets
- Intel® 82801DB x
1 I/O Controller Hub (ICH4)
- Firmware Hub (FWH)
4M bits flash ROM x1
- PCI V2.2
compliant
On
Board LAN
- Dual Intel®
82551QM 10/100 ethernet controllers for PEAK715VL2
- Intel® 82551QM
controller x1 and Intel® 82540EM gigabit ethernet controller x1 for PEAK715VL2G
- Compliant with
PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y, IEEE802.3ab
- WfM 2.0 compliant
- Drivers support:
DOS/Windows®, Windows® 95/98/2000, Windows® NT, Netware 5.0, Linux
- RJ45 with LED
connector x 2
On
Board VGA
- Intel® 82845G (GMCH)
chipset integrated with Graphics controller
- Hardware motion
compensation assist for software MPEG/DVD decode
- 64MB VGA share
Memory
- 1.5V AGP
interface 4X
- Fully PC 98 and
PC 99 Compliant
- 15 pin CRT
connector x1
On
Chip I/O (ICH2)
- On board USB port
x 2
- Ultra
ATA100/66/33 support, 40 pin connector x2
On
Board I/O
- ITE 8712F-A Super
I/O
- SIO x 2, with 2 x
16C550 UARTs, 10-pin header x 2
- PIO x 1,
bi-directional, EPP/ECP support, 26-pin connector x 1
- Floppy Disk
controller: 34-pin connector x 1
- 6-pin mini DIN
connector x 1, for PS/2 keyboard/mouse, 5-pin connector x 1(for external
keyboard)
- Optional on-board
compact flash socket
- On Board buzzer x
1
- GPIO (4 in 4 out)
- On board 2 pin
header for
- On board 2 pin
header for reset SW / 2 pin for IDE active LED / 2 pin ATX power SW
- One 3-pin power
header for 3 pin power cable connect to backplane board to support ATX
Power On function.
- On board 4 pin
additional Power Source input
- AC97 output, 10
pin header x 1
System Monitor
- Derived from
Super IO ITE 8712F-A to support system monitor.
- 8 voltage (For
+1.5V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By)
- One fan speed for
CPU; one fan speed for System
- Temperature x2
(one for CPU internal use, another for external system use)
ACPI
Function
(only when 3 pins Power
cable connect to Backplane which connect with ATX Power Source )
- Soft Power off
- Power On by LAN
- Power On by
Keyboard
- Power On by Ring
Real
Timer Clock
- On chip RTC with
battery back up
- External Li
Battery x 1
Watchdog Timer
- Watchdog timeout
can be programmable by Software from 1, 2, 4, 8, 16, 32, ....128seconds
PCI
to ISA Bridge & ISAMAX Support
- ITE 8888Fx 1 PCI
to ISA Bridge
- Provide 64mA high
driving capability to maximize ISA signals for support ISA cards up to 20
on the backplane ISA Slot.
|
Dimensions
Power Requirements
|
Voltage
|
Maximum
|
|
+5V
|
10A
|
|
+12V
|
12A
|
|
-12V
|
500mA
|
Environments
- Operating
temperatures: 0°Cto 60°C
- Storage
temperatures: -20°C to 80°C
- Relative
humidity: 10% to 90% (Non-condensing)
Certification

PEAK715VL2
-
- Full-size
Socket 478 Intel® Pentium® 4 processor CPU Card w/VGA/Dual LAN (Dual
Intel® 82551QM 10/100 ethernet controllers)
-
-
PEAK715VL2G
- Full-size
Socket 478 Intel® Pentium® 4 processor CPU Card w/VGA/Dual LAN
(Intel® 82551QM 10/100 ethernet controller x1 and Intel® 82540EM
ethernet controller x1)
|
|
|