System Architecture

• Full size SBC with PICMG (PCI+ISA) Golden finger
• AGP 2.0 compliant
• PCI V2.2 compliant
• PICMG 1.0 (Rev.2.0) compliant

Main Memory

• DDR DIMM x 2 Support Max Memory size up to 2GB (DDR200/DDR266)
• ECC support (single bit error correction/Multiple bit errors reporting)
• Only support for (No Registered) DIMM

BIOS

• Award System BIOS
• Plug & Play support
• Advanced Power Management support
• Advanced configuration & Power Interface support
• 2/4M bits flash ROM

Chip Set

• Intel® 845E (MCH)
• Intel® 82801x 1 I/O Controller Hub (ICH2)
• Firmware Hub (FWH) 4M bits flash ROM x1
• PCI V2.2 compliant

On Board VGA

• ATI Rage 128 Pro (Ultra 4XL) VGA Controller, 1.5V AGP 4X Interface
• 32MB VGA Memory on Board
• Fully PC 98 and PC 99 Compliant
• 15 pin CRT connector x 1
• DVI (TMDS) box header x 1

On Board LAN

• Intel® 82559 Ethernet controller x 2 for PEAK712VL2
• (Intel® 82559 controller x1 +Intel® 82540 controller x1) for PEAK712VL2G
• 10 Base T/100 Base TX support, full duplex; Intel® 82540 support for 10 Base T/100 Base TX /(1000Base-T for PEAK712VL2G only)
• Compliant with PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y, IEEE802.3ab
• Drivers support: DOS/Windows® , Windows® 95/98/2000, Windows® NT, Netware 5.0, Linux
• RJ45 with LED connector x 2

On Chip I/O (ICH2)

• On board USB port x 2
• Ultra DMA33/66/100 support, 40-pin connector x 2. Two pins power connector for DOM (Disk On Module)

On Board I/O

• ITE 8712F-A Super I/O
• SIO x 2, with 2 x 16C550 UARTs, 10-pin header x 2
• PIO x 1, bi-directional, EPP/ECP support, 26-pin connector x 1
• Floppy Disk controller: 34-pin connector x 1
• 6-pin mini DIN connector x 1, for PS/2 keyboard/mouse, 5-pin connector x 1(for external keyboard)
• On Board buzzer x 1
• GPIO (4 in 4 out)
• On board 2-pin header for
• On board 2-pin header for reset SW / 2-pin for IDE active LED / 2-pin ATX power SW
• One 3-pin power header for 3-pin Power Cable connect to Backplane Board to support ATX Power On function.
• On board 4-pin Additional Power Source Input
• AC97 output, 10-pin header x 1

System Monitor

• Derived from Super IO ITE 8712F-A to support system monitor.
• 8 voltage (For+1.8V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By)
• One Fan speed for CPU
• Temperature x 2 (one for CPU internal use, another for external system use)

ACPI Function
(only when 3-pins Power cable connect to Backplane which connect with ATX Power Source )

• Soft Power off
• Power On by LAN
• Power On by Keyboard
• Power On by Ring

Real Timer Clock

• On chip RTC with battery back up
• External Li Battery x 1

Watchdog Timer

• Watchdog timeout can be programmable by Software from 1, 2, 4, 8, 16, 32, 64 seconds

PCI to ISA Bridge & ISAMAX Support

• ITE 8888Fx 1 PCI to ISA Bridge
• Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on the backplane ISA Slot.

Dimensions

• 338.58mm(L) x 122mm(W)

Power Requirements

Environments

• Operating temperatures: 0°Cto 60°C
• Storage temperatures: -20°C to 80°C
• Relative humidity: 10% to 90% (Non-condensing)

Certification

• CE approval
• FCC Class A

PEAK712VL2   Full-size Socket 478 Intel® Pentium® 4 Processor CPU Card w/VGA/DDR/Dual LAN (Intel® 82559 + Intel 82559) PEAK712VL2G Full- size Socket 478 Intel® Pentium® 4 Processor CPU Card w/VGA/DDR/Dual LAN (Intel® 82559 + Intel 82540)

Top

An Industrial Partner 1999-2002. All rights reserved.

Industrial Products

E-Mail

VoxTechnologies Corp. - Industrial Computer Leader Tel: 1-972-234-4343 Fax: 1-972-234-4295 Toll-Free: 1-888-568-6224

For over a decade, VoxTechnologies has been a leading source of industrial computers and complete system products for the O.E.M. and Systems Integrator. Our primary goal is to provide a solution source for engineers that have the challenging task of interfacing and controlling the real world.

Telephone: 1-972-234-4343 General Info: info@voxtechnologies.com Sales Info: sales@voxtechnologies.com