|
Home Up Search Industrial Products
PEAK715VL2(G) PEAK715VL2 PEAK712VL2(G) PEAK712VL2 PEAK710VL PEAK639VL2 PEAK603P PEAK6720VL PEAK6620VL2 PEAK6422V PEAK6320A PEAK670VL PEAK660VL2 PEAK650VL2 PEAK650A PEAK637 PEAK635A PEAK632A PEAK570A PEAK530 PEAK603VL PEAK602VL PEAK600VL PEAK550 EBKSCSI160D EBKSCSI2 EBKSCSI EBK100L4 NEX90SB NEX CARE Quick Reference
| |

System
Architecture
- Full size SBC
with PICMG(PCI+ISA) Golden finger
- PCI V2.2
compliant
- PICMG 1.0
(Rev.2.0) compliant
On Board CPU
- Onboard VIA
C3 Processor EBGA Package with 128KB Level 1 and 64KB Level 2 Cache
- 800MHZ CPU
speed up to 1GHz or above in the future
- CPU FSB
133MHz
Main Memory
-
Support 168 pin DIMM Socket x 2, up to 1GB
-
PCI 133 SDRAM types
BIOS
-
Award System BIOS
-
Plug & Play support
-
Advanced Power Management support
-
Advanced Configuration & Power Interface support
-
2Mb flash ROM (Design for 4Mb or above)
Chip Set
- VIA 8606 (
Twister T ) 100 /133 MHz North Bridge
- VIA VT82C686B
PSIPC PCI SUPER-I/O INTEGRATED PERIPHERAL CONTROLLER
On Chip VGA
-
VIA 8606 Integrated Savage4 2D/3D/Video Accelerator
ˇm Optimized Shared Memory Architecture (SMA)
ˇm 8 / 16 / 32 MB frame buffer using system memory
ˇm Single cycle 128-bit 3D architecture
ˇm Full internal AGP 4x performance
ˇm Next generation, 128-bit 2D graphics engine
ˇm High quality DVD video playback
ˇm 2D/3D resolutions up to 1920x1440
ˇm 3D Rendering Features
-
Extensive LCD Support
ˇn36-bit DSTN/TFT flat panel interface with 256 gray shade
-
support
ˇnIntegrated 110 MHz LVDS interface
ˇnSupport for all resolutions up to 1600x1200
-
Drivers supportˇGWindows 95/98/2000, Windows NT4.0, Linux.
-
15 pin D-Sub VGA Output
-
16 pin Box Header for LVDS Interface Connector x 1
-
50 pin Box Header for TTL LCD Interface support x 1
On Board LAN
-
RTL8139C Ethernet Controller x2
-
10 Base T/100 Base TX support, full duplex
-
Complied with PCI V2.1, IEEE802.3, IEEE 802.3U
-
Drivers support: DOS/Windows, Windows 95/98/2000, Windows NT, Netware,
SCO Open Server 5.0, Linux
-
RJ45 connector 2 (Pin-header for LED)
On Board I/O
-
VT82C686B INTEGRATED Super I/O:
ˇm Integrated ISA Bus Controller with integrated DMA, timer, and
interrupt controller
ˇm Integrated Keyboard Controller with PS2 mouse support
ˇm Integrated DS12885-style Real Time Clock and Day/Month Alarm for
ACPI
ˇm Integrated USB Controller with root hub and four function ports
ˇm Integrated UltraDMA-33/66/100 master mode EIDE controller with
enhanced PCI bus commands
ˇm Distributed DMA support for ISA legacy DMA across the PCI bus
-
SIO x 2 (Pitch: 2.00mm), with 2x16C550 UARTs, 10 pin header x 2 (For
RS-232) (Back-Side Reserved for 422/485)
-
PIO x 1 (Pitch: 2.00mm), bi-directional, EPP/ECP support, 26 pin
connector x 1
-
Floppy Disk controllerˇG34 pin connector ˇŃ 1 UltraDMA-33/66/100 IDE
with 40 pin connector ˇŃ 2 (2pin power header for DOM)
-
On board Compact Flash ˇŃ 1
-
External Keyboard 5 pin connector ˇŃ 1ˇF6 pin mini DIN connector ˇŃ 1,
for PS/ keyboard/mous
-
On board USB port ˇŃ 2
-
GPIO (4 in/ 4out)
-
On board buzzer ˇŃ 1
-
On board 5 pin header for IrDA
-
On Board 2 pin header for reset SW / 2 Pin for Power LED / 2 pin power
SW
-
3 Pin Jst (5Vsb, PS-On, GND) for connect to Back plane support the ATX
Power Mode
-
AC 97 Pin Header Reserved
On Board NEXCOM proprietary PCI/PC104 interface
- Reserved 32 bit PCI interface for NEXCOM EBK module
- PC104 Interface
On Chip RTC
- On chip RTC with battery back up
System Monitor
-
VT82C686B Integrated Voltage, Temperature, Fan Speed Monitor and
Controller
-
5 positive voltage , 2 temperature (one internal) and 1 fan-speed
monitoring
ISAMAX Support
- Maximize ISA signals to support 20 ISA cards
Watchdog Timer
- 1, 2, 4, 8, 16, 32, 64 seconds time-out intervals
Dimensions
Power Requirements
- +5V: 8A (Max.)
- +12V: 500mA (Max.)
- +5Vsb: 800mA (Max.)
Environments
- Operating
temperatures: 0˘J to 60˘J
- Storage
temperatures: -20˘J to 80˘J
- Relative
humidity: 10% to 90% (Non-condensing)
Certification

PEAK639VL2
-
-
Full-size On Board 800MHz CPU Card with LVDS/TTL LCD, Dual
Realtek 8139C LAN
|
|
|
|