|
Home Up Search Industrial Products
PEAK715VL2(G) PEAK715VL2 PEAK712VL2(G) PEAK712VL2 PEAK710VL PEAK639VL2 PEAK603P PEAK6720VL PEAK6620VL2 PEAK6422V PEAK6320A PEAK670VL PEAK660VL2 PEAK650VL2 PEAK650A PEAK637 PEAK635A PEAK632A PEAK570A PEAK530 PEAK603VL PEAK602VL PEAK600VL PEAK550 EBKSCSI160D EBKSCSI2 EBKSCSI EBK100L4 NEX90SB NEX CARE Quick Reference
| |
|
|
 |
Intel® Socket 478 Pentium® 4 CPU with 400MHz System Bus up
to 2GHz+ |
 |
Max. 3GB SDRAM, 168-pin DIMM x 3 |
 |
Intel® 845 Chipset |
 |
ATI Rage 128 Pro AGP 4X (1.5V) VGA controller with 16MB on die
memory |
 |
Intel® ICH2 embedded MAC with Intel® 82562EM(PLC) PHY 10/100
Ethernet controller |
|
|
|
|

System Architecture
- Full size SBC with 32bit/33MHz PCI/ISA Golden finger
- Intel Socket 478 Pentium 4 with 400MHz System Bus
- PCI V2.0 compliant
- PICMG 1.0 (Rev. 2.0) compliant
CPU Support
- Intel® Pentium® 4 CPU with 256K cache on die, CPU running at
400MHz system bus up to 2GHz+
- Support streaming SIMD instruction
Main Memory
- Support SDRAM up to 3GB (Max.)
- 168-pin DIMM x 3
- ECC support
- No Registered DIMM Support
BIOS
- Award System BIOS
- Plug & Play support
- Advanced Power Management support
- Advanced configuration & Power Interface support
- 4M bits flash ROM
Chip Set
- Intel® 845 (MCH) Chipset
- PCI V2.2 compliant
On Board VGA
- ATI Rage 128 Pro (Ultra 4XL) with 16MB memory on Board; 1.5V AGP
4X interface
- Fully PC98 and PC99 Compliant
On Board LAN
- Intel® ICH2 embedded MAC with Intel® 82562EM(PLC) PHY 10/100
Ethernet controller
- 10/100 base T/TX x 1 support, full duplex
- Compliant with PCI V2.2, IEEE 802.3X
- Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows®
NT, Netware, SCO Open Server 5.0, Linux™
- RJ45 connector x 1
- Support Remote Monitoring (Alerting on LAN)
On Board I/O
- ITE 8712F-A Server I/O
- SIO x 2, with 2 x 16C550 UARTs, 10 pin header x 1, D-Sub 9 pin x 1
- PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1
- Floppy Disk controller: 34 pin connector x1
- On chip enhanced IDE x 2, Ultra DMA 33/66/100 support, 40 pin
connector x 2
- External Keyboard 5 pin connector x 1; 6 pin mini DIN connector
x1, for PS/2 keyboard/mouse
- On board USB port x 2
- On board buzzer x 1
- On board 2 pin header for I2C; GPIO (4 in 4 out) x1
- On board 5 pin header for IrDA x1
- On Board 2 pin header for reset SW, 5 pin for keylock, 2 pin
header for power push button, 3 Pin Jst ( 5Vsb, PS-On, GND ) to
Backplane
- On board 4 pin Additional Power Source Input
On Board proprietary PCI
interface
- Reserved 32 bit PCI interface for EBK module
On Board Solid State Disk Socket
- Power header beside IDE connector to support DOM
On Board RTC
- High precision real time clock/calendar
System Monitor
- Driver from Super IO ITE 8712F-A to system monitor controller
- 8 voltages (For +1.8v, +3.3V, +5V, -5V, +12V, -12V, Vcore and
Vcc5V stand-By)
- Fan speed (For CPU) x 1; Fan speed (For System) x2
- Temperatures x 3; (one for CPU, the others for system)
ISAMAX Support
- Maximize ISA signals to support ISA cards up to 20
Watchdog Timer
- 1~64 seconds time-out intervals
Dimensions
Power Requirements
- +5V: 10A (Max.)
- +12V: 10A (Max.)
- -12V: 50mA (Max.)
Environments
- Operating temperatures: 0°C to 60°C
- Storage temperatures: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
Certification

PEAK 710VL
-
- Full-size Socket 478 Pentium® 4
(32bit/33MHz) CPU Card w/VGA/LAN
|
|
|