|
Home
Up
Search
Industrial Products
SAGP815EV
SAGP845EV
| |
SAGP815EV
PIAGP Socket 370 Based CPU Board |
 |
|
SAGP815EV PDF |
|
 |
-
CPU:
Supports Intel Coppermine/Tualatin socket-370 series Pentium III and
Celeron CPU with 66/100/133 MHz FSB
-
System Chipset:
Intel 815E stepping chipset
-
System Memory: 2x 168pin SDRAM socket maximum up to 512MB
-
Display:
Built-in FW82815 chip
-
Bus:
AGP 4X, 66MHz (when you plug in AGP VGA card with the SAGP-815EV CPU
board, it will automatically disable the SAGP-815EV's internal VGA
function
-
VRAM: Shared with system memory (DVMT technology) Resolution: up to
1600x1280@8 bit color Connector: DB-15 for CRT display SSD: 1x onboard
Compact Flash type II socket onboard for CF Disk data or IBM Microdrive
-
Ethernet: Onboard 10/100Mbps Fast ethernet controller (82562ET PHY)
-
Audio: Onboard C-Media CMI8738 5.1 channel audio chip
-
I/O: -2x ATA/100 IDE channel support CD-ROM, ZIP and LS-120
bootable drive
4x USB 2.0 ports
1x FDD channel supports 1.44/2.88MB and 3-mode floppy drive
1x LPT parallel port by pin headers supports SPP/ECP/EEP mode
1x IrDA (SIR)
1x PS/2 connector for keyboard/mouse
-
WDT: Software programmable supports 1~255 seconds system reset
Hardware monitoring: Provides CPU Vcore, Vcc; CPU/System fan speed and
temperature detecting function. ATX power control function: meets ACPI 1.1
specification
Power consumption: +5V@7.6A; 12V@230Ma (initial 1GHz CPU with 256MB
memory) Operating Temperature: 0~ 60oCRelative Humidity: 5~95%,
non-condensing.
Note: when using P4 CPU below 2.5GHz, we recommend the use of the CF512 high
performance cooling fan (optional) When using higher than 2.5GHz, then you
need stronger cooling system
|
 |
|
SAGP815EV PIAGP
Socket-370 Based CPU Board |
|
