---------- JUKI3711P ----------  

---------- JUKI3712 ----------

 

• Supports Socket 370 base CPU (Celeron^TM/Pentium^® III) up to 133MHz FSB

• VIA VT82C596B/693A chipset supports Ultra DMA66 IDE interface

• One DIMM socket up to 256MB SDRAM

• CHIPS 69000 LCD/CRT VGA controller on board with 2MB V-RAM

• Intel^® 82559ER 10/100Mbps Ethernet chip on board

• Standard P9 (+5V) power connector on board for backplane-less application

• CPU : Supports Socket 370 base CPU ( Celeron^TM / Pentium^® III ) up to 133MHz FSB

• System Memory : One 168-pin DIMM sockets up to 256MB SDRAM

• System Chipset : VIA VT82C596B/693A

• BIOS : Award PnP Flash BIOS

• Video Controller : 
  --> Chip : CHIPS 69000 LCD/CRT VGA
  --> Bus : PCI
  --> V-RAM : Embedded 2MB SDRAM
  --> Resolution : 1280 x 1024 ( 256 colors )
  --> Connectors : DB-15 for CRT display
                           50-pin pin-header for LCD panel

• Super I/O :
       1 x RS-232 port and 1 x RS-232/422/485 selectable port with Auto-Direction function
       1 x parallel port ( support SPP/EPP/ECP mode )
       IrDA

• Ethernet : Intel^® 82559ER 10/100Mbps Ethernet chip with RJ-45 connector

• IDE : One port by 40-pin pin-header, supports Ultra DMA66 mode

• FDD : One port

• Software programmable Watchdog Timer

• SSD : One CompactFlash socket

• One PC/104 expansion connector for add-on cards

• E²Key^TM : A non-volatile 1Kbit EEPROM is provided to retain application critical read/write data

• Power Consumption : 4A@+5V   ( Pentium III and 128MB EDO RAM )

• Operating temperature : 0^o~60^oC ( CPU needs cooler )

• Relative humidity : 5 ~ 95%, non-condensing

JUKI3711P 

 JUKI3712